SRC code B6005121

["Peter Dow" <maillist@xxxxxxxxxxxxxxx>]

Hi All,

>From my associate, Robbin Chewings:

"I bought a double wide AS/400 model 170-2159 a year agon and it has been
working great. In November 2004, I bought a 2748 card and finally got around
to installing it last week in the aforementioned AS/400.  I setup 2 ASPs and
RAID and then compression on 10 new 8gig drives and then booted to OS/400
(V5R2) and setup my libraries, etc. and everything was working fine until I
rebooted to test my startup routine.

I get the following on the control panel with B normal or B manual power up:

SRC B600 5121,
12-URC is E4B0 0161
13-URC is 0002 000D
14-URC is 0000 1002

I can't even get to DST, let alone bring up the system.  I can do a D-IPL
but the service log in that mode is totally empty.

I found TONS of references to B6005121 for all kinds of errors, none of
which seem to apply.  The Problem Analysis manual says to do a MSD and send
it to my service representative.  Since I don't have S/W or H/W maintenance
with IBM, that puts me in a spot.

Any advice will be appreciated.  I probably screwed something up, but WHAT?
My alternative is to do a scratch install and hope it doesn't crap out
again.  Since I don't know what's wrong, it will most likely recur."

Peter Dow
Dow Software Services, Inc.
909 793-9050 voice
909 793-4480 fax
951 522-3214 cell



-- 
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.300 / Virus Database: 265.7.3 - Release Date: 1/24/2005