RE: Media error while reloading Licensed Internal Code

["Richard" <rallen@xxxxxxxxxxx>]

It looks like we got it loading OK, the problem was it was not recognizing
one of the disk drives so we selected to Load Internal License code and
Initialize.

We are now getting messages on the console and replying as it moves along
the re-load.

After we get it reloaded all we will need to do is add the Disk Unit into
the ASP and it should work fine.

Keeping our fingers crossed and want to thank everyone for the help with
this one.

 

-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of rob@xxxxxxxxx
Sent: Wednesday, August 25, 2004 1:18 PM
To: Midrange Systems Technical Discussion
Subject: Re: Media error while reloading Licensed Internal Code

Is the model 500 like some of the other models and it doesn't show N for 
Normal, nor M for Manual?  Instead it shows someone masturba... for Manual 
and an 'OK' for Normal.  There should be a Rosetta stone or some other 
hieroglyphics translator attached to the machine which will show you that. 
 It's about the size of a sheet of paper.  We took ours off of an old 
machine and keep moving it to a newer one.  Basically, pressing the white 
button will do nothing, if you are not in Manual mode.  Also, you cannot 
select certain IPL options, unless you are in Manual mode.

Rob Berendt
-- 
Group Dekko Services, LLC
Dept 01.073
PO Box 2000
Dock 108
6928N 400E
Kendallville, IN 46755
http://www.dekko.com

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.