RE: Media error while reloading Licensed Internal Code

There is a list of Manual Normal Auto Secure with a corresponding light next
to it, as the blue button is pushed they light up sequentially.

We took the front cover off and played with the key (the key looks like a
piece of plastic that you insert into the machine (no turning like a normal
key would), We were not sure if it was seating fully.

We now can set the IPL mode and when we set it to 2 D we end up getting a
new SRC code  B103 1933 which again is a pain in the AS.... to find what it
means.

We are currently searching for the meaning and if anyone know what it means
I would appreciate a reply.

Thanks for everyone's assistance on this even though I am not much further
along I feel I may be getting closer if I can get the meaning of SRC B103
1933

   

-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of rob@xxxxxxxxx
Sent: Wednesday, August 25, 2004 1:18 PM
To: Midrange Systems Technical Discussion
Subject: Re: Media error while reloading Licensed Internal Code

Is the model 500 like some of the other models and it doesn't show N for 
Normal, nor M for Manual?  Instead it shows someone masturba... for Manual 
and an 'OK' for Normal.  There should be a Rosetta stone or some other 
hieroglyphics translator attached to the machine which will show you that. 
 It's about the size of a sheet of paper.  We took ours off of an old 
machine and keep moving it to a newer one.  Basically, pressing the white 
button will do nothing, if you are not in Manual mode.  Also, you cannot 
select certain IPL options, unless you are in Manual mode.

Rob Berendt
-- 
Group Dekko Services, LLC
Dept 01.073
PO Box 2000
Dock 108
6928N 400E
Kendallville, IN 46755
http://www.dekko.com

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.