RE: Help! Best Host Print Transform for Dell W5300 Printer

Mike,

Have you looked at using the PJL driver instead of remote OUTQ?

Using the PJL, SNMP, or IPP drivers are a much better choice than RMTOUTQ.


Charles


> -----Original Message-----
> From: Mike [mailto:mshaw2456@xxxxxxxxxxx]
> Sent: Wednesday, August 18, 2004 7:17 PM
> To: 'Midrange Systems Technical Discussion'
> Subject: RE: Help! Best Host Print Transform for Dell W5300 Printer
> 
> 
> Kirk,
> 
> Yup, kid tested and dad approved!  Even though the printer 
> says Dell on the
> front, I wonder if it is based on a Lexmark print engine????  <VBG>
> 
> Thanks for the quick response.
> 
> Regards,
> 
> Mike Shaw
> 
> -----Original Message-----
> From: midrange-l-bounces@xxxxxxxxxxxx
> [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Kirk Goins
> Sent: Wednesday, August 18, 2004 3:47 PM
> To: Midrange Systems Technical Discussion
> Subject: Re: Help! Best Host Print Transform for Dell W5300 Printer
> 
> Looks like it's an Lexmark.... Use *LEXOPTRA
> 
> 
> Now how did I find that...
> 
> Go to WWW-912.ibm.com (yes that's a dash before the 912)
> In the top right search box type "support ascii printers xxx" 
>  xxx being 
> Dell or HP or ??
> 
> You will get a bunch of hits, goto the  "Software Knowledge Base" tab 
> and look for
> "Support for ASCII Printers from xxx"
> 
> Use the tables you find there
> 
> 
> Mike wrote:
> 
> >Our network folks replaced production H-P printers that were 
> working via a
> >remote OUTQ as *HP4000.  They were replaced with Dell W5300 
> laser printers.
> >The end result is that there is no one-to-one Dell printer 
> selections for
> >Host Print Transform in the remote OUTQ description and it 
> is causing grief
> >to the users.
> >
> > 
> >
> >I have kept the wolves away from the sled by using a 
> LEXMARKC750 HPT so far
> >and it is working better than the HP4000 HPT.  Has anyone 
> installed Dell
> >printers and found a better HPT fit for them?  
> >
> > 
> >
> >I am current on the HPT PTFs from IBM at V5R2M0 and no Dell 
> printer support
> >in site.  Thanks!
> >
> > 
> >
> >Regards,
> >
> > 
> >
> >Mike Shaw
> >
> >
> >  
> >
> >-------------------------------------------------------------
> -----------
> >
> >--
> >This is the Midrange Systems Technical Discussion 
> (MIDRANGE-L) mailing list
> >To post a message email: MIDRANGE-L@xxxxxxxxxxxx
> >To subscribe, unsubscribe, or change list options,
> >visit: http://lists.midrange.com/mailman/listinfo/midrange-l
> >or email: MIDRANGE-L-request@xxxxxxxxxxxx
> >Before posting, please take a moment to review the archives
> >at http://archive.midrange.com/midrange-l.
> >
> >  
> >
> 
> -- 
> Kirk Goins CCNA
> Systems Engineer, Manage Inc.
> IBM Certified iSeries Solutions Expert
> IBM Certified iSeries e-Business Infrastructure
> IBM Certified Designing IBM e-business Solutions 
> Office 503-353-1721 x106 Cell 503-577-9519
> kirkg@xxxxxxxxxxxxx      www.manageinc.com
> 
> --
> This is the Midrange Systems Technical Discussion 
> (MIDRANGE-L) mailing list
> To post a message email: MIDRANGE-L@xxxxxxxxxxxx
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/mailman/listinfo/midrange-l
> or email: MIDRANGE-L-request@xxxxxxxxxxxx
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/midrange-l.
> 
> 
> 
> 
> --
> This is the Midrange Systems Technical Discussion 
> (MIDRANGE-L) mailing list
> To post a message email: MIDRANGE-L@xxxxxxxxxxxx
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/mailman/listinfo/midrange-l
> or email: MIDRANGE-L-request@xxxxxxxxxxxx
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/midrange-l.
>