Re: System Reference Codes on a 170

On Mon, 31 May 2004 13:11:29 +0200, you wrote:


Hi Philipp,



Many thanks for your quick reply.


The configuration will be a slight problem...
I got this AS400 at my last job.
In the meantime I left the company, and the configuration-sheet is still there. 
Should this really be needed, then I can always ask a colleague to bring it in.
I do have however a tape-backup if needed.

This system was originally purchased for Y2K testing and contained the absolute
minimum regarding hard- and software.
Mirror was not installed as far I can remember.
I'm not even sure if there was any protection at all.

I did a manual IPL from the A-source as You suggested and got following SRCs :

11-3 675A9010
12-3 00B20117
13-3 00000110
14-3 FFFFFFFF
15-3 675A0004
16-3 00000000
17-3 00000000
18-3 00000000
19-3 07278100
20-3 61702289
21-3       FF
22-3 A1003022


What is really puzzling me is the fact that I don't get any response whatsoever
on the console, cursor in the upper right corner.

I already put the twinax-controller into another port.
Still no luck, gives the same SRCs.

Am I perhaps using the incorrect cable for this ?
( EC 896466 / PN 72X5645 )
The console works on my 40S.


Philipp, many thanks for your help


Chris



          .                        \\|//                        .
 ._O_.   . ________________________(o o)________________________ .   ._O_.
/_\o/_\ .                    -oOOO--(_)--OOOo-                    . /_\o/_\
  /H\  .          live : Chris.Spirinckx@xxxxxxxxxx                .  /H\
 (=O=).           ICQ  : 14033396                                   .(=O=)
   U .            work : chris_spirinckx@xxxxxxxxxxxxxx              . U