Chuck, Have you setup Management Central piece of iSeries Navigator? You also need to start the TCP server *MGTC. That could be the issue you are seeing. <hth> Regards, Mike Shaw -----Original Message----- From: midrange-l-bounces@xxxxxxxxxxxx [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Chuck Lewis Sent: Wednesday, March 17, 2004 1:23 PM To: midrange-l Subject: Problems in iSeries Navigator Hi Folks, Have not done a whole lot with iSeries Navigator; been buried. We went from a 620 running V4R5 to an 810 running V5R2 in September so previous to that there wasn't much point. Well I am very interested in some of the stuff in it now and am trying to use it. I get prompted to login and do that with a profile containing *IOSYSCFG but I get an error box: Unable to complete the connection to central system '172.16.10.11' So am I missing something ? Is there some service that needs to be started ? In the message "details" tab it says: To start the Management Central servers (QYPSSRV and QYPSJSVR) on an iSeries server, you must have authority to use Management Central on that system. Authority to start the servers requires *USE authority to the Start TCP/IP Server (STRTCPSVR) command. The Management Central servers usually run under the security officer (QSECOFR) profile. If this profile is disabled for any reason, the servers will not start. 1 In iSeries Navigator, expand My Connections (or your active environment). 2 Expand the iSeries server that you are using as your central system. 3 Expand Network. 4 Expand Servers. 5 Select TCP/IP. 6 Right-click Management Central and select Start. You can also start the Management Central servers by issuing this command from any OS/400 command line: STRTCPSVR SERVER(*MGTC). Well I do that up to step # 6 and when I right-click Management Central at the top of the tree there is no Start option. So I use the OS/400 command and get: Management Central Server job was not submitted. Reason code 01. Management Central Server job was not submitted. Reason code 01. MGTC server not started. STRTCPSVR completed successfully; however errors occurred. And reason code 01 is 01 - The QYPSSRV server job is already running. So I guess it is already running ? Thanks ! Chuck _______________________________________________ This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe, unsubscribe, or change list options, visit: http://lists.midrange.com/mailman/listinfo/midrange-l or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a moment to review the archives at http://archive.midrange.com/midrange-l.
As an Amazon Associate we earn from qualifying purchases.
Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.