When you do a WRKACTJOB JOB(QYPS*) do you see two or more jobs? You should see QYPSJSVR and QYPSSRV at least, and maybe QYPSPFRCOL. QYPSJSVR is the Management Central Java server and requires the use of a profile with *ALLOBJ authority, the default is QSECOFR. IIRC QSECOFR must be enabled and have a valid, non-expired password for this job to run. There is a procedure for specifying an alternate profile for this job, but I have not tried this. Hope this helps, Scott Ingvaldson AS/400 System Administrator GuideOne Insurance Group -----Original Message----- date: Wed, 17 Mar 2004 16:23:04 -0500 from: "Chuck Lewis" <clewis@xxxxxxxxxx> subject: Problems in iSeries Navigator Hi Folks, Have not done a whole lot with iSeries Navigator; been buried. We went from a 620 running V4R5 to an 810 running V5R2 in September so previous to that there wasn't much point. Well I am very interested in some of the stuff in it now and am trying to use it. I get prompted to login and do that with a profile containing *IOSYSCFG but I get an error box: Unable to complete the connection to central system '172.16.10.11' So am I missing something ? Is there some service that needs to be started ? In the message "details" tab it says: To start the Management Central servers (QYPSSRV and QYPSJSVR) on an iSeries server, you must have authority to use Management Central on that system. Authority to start the servers requires *USE authority to the Start TCP/IP Server (STRTCPSVR) command. The Management Central servers usually run under the security officer (QSECOFR) profile. If this profile is disabled for any reason, the servers will not start. 1 In iSeries Navigator, expand My Connections (or your active environment). 2 Expand the iSeries server that you are using as your central system. 3 Expand Network. 4 Expand Servers. 5 Select TCP/IP. 6 Right-click Management Central and select Start. You can also start the Management Central servers by issuing this command from any OS/400 command line: STRTCPSVR SERVER(*MGTC). Well I do that up to step # 6 and when I right-click Management Central at the top of the tree there is no Start option. So I use the OS/400 command and get: Management Central Server job was not submitted. Reason code 01. Management Central Server job was not submitted. Reason code 01. MGTC server not started. STRTCPSVR completed successfully; however errors occurred. And reason code 01 is 01 - The QYPSSRV server job is already running. So I guess it is already running ? Thanks ! Chuck This message and accompanying documents are covered by the Electronic Communications Privacy Act, 18 U.S.C. §§ 2510-2521, and contains information intended for the specified individual(s) only. This information is confidential. If you are not the intended recipient or an agent responsible for delivering it to the intended recipient, you are hereby notified that you have received this document in error and that any review, dissemination, copying, or the taking of any action based on the contents of this information is strictly prohibited. If you have received this communication in error, please notify us immediately by e-mail, and delete the original message.
As an Amazon Associate we earn from qualifying purchases.
Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.