Re: Printing legal to another drawer

[rob@xxxxxxxxx]

Dave,

Troy got it working here after talking to IBM.  Seems there are two 
solutions:
1)  when you want to use legal, you have to
a)  Stop the writer
b)  Vary the device off
c)  Change some parameters on the device description
d)  Vary the device back on
e)  Start the writer
Switching back is a reversal of the steps.
2)  Or you can use the WSCST.  However all printouts will then go to that 
drawer.  That's not quite what we had in mind either.

Rob Berendt
-- 
"All creatures will make merry... under pain of death."
-Ming the Merciless (Flash Gordon)




"David A Parnin" <daparnin@xxxxxxxxxxxxxxxxxx> 
Sent by: midrange-l-bounces@xxxxxxxxxxxx
01/06/2004 04:23 PM
Please respond to
Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx>


To
midrange-l@xxxxxxxxxxxx
cc

Fax to

Subject
Re: Printing legal to another drawer







I had a similar issue setting the default drawer that our copier was
printing to.  Ultimately I had to use create a workstation customizing
object and specify it in the WSCST parameter of CHGOUTQ.  I can review the
specific changes that I did if you like.  You might want to take a look at
the following:

http://www-912.ibm.com/s_dir/slkbase.NSF/0/bbf048cc51f9d5b8862565c2007d0dab?OpenDocument

http://publib.boulder.ibm.com/iseries/v5r2/ic2924/books/sm16/c4156050.pdf


Dave Parnin
Nishikawa Standard Company
Topeka, IN  46571
daparnin@xxxxxxxxxxxxxxxxxx





  
                      rob@xxxxxxxxx  
                                               To: 
MIDRANGE-L@xxxxxxxxxxxx@SMTP@CTB 
                      01/06/2004 03:44         cc:   
                      PM                       Subject:  Printing legal to 
another drawer 
                      Please respond to  
                      Midrange Systems  
                      Technical  
                      Discussion  
                      <midrange-l@midra  
                      nge.com>  
  
  



I can take a normal print screen and do a chgsplfa and get it to print on
drawer two.  However I cannot get this to print on drawer two, even after
loading legal paper and setting the indicator on the drawer to legal.
OVRPRTF FILE(QSYSPRT)
        PAGESIZE(112 132)
        LPI(8)
        CPI(15)
        OVRFLW(112)
It always goes to drawer 1 instead.

Printer = Lexmark Optra S 1650
Device description . . . . . . . . :   P01A01
Option . . . . . . . . . . . . . . :   *BASIC
Category of device . . . . . . . . :   *PRT

Device class . . . . . . . . . . . :   *LAN
Device type  . . . . . . . . . . . :   3812
Device model . . . . . . . . . . . :   1
LAN attachment . . . . . . . . . . :   *IP
Port number  . . . . . . . . . . . :   9100
Physical attachment  . . . . . . . :   *DIRECT
Online at IPL  . . . . . . . . . . :   *YES
Font:
  Identifier . . . . . . . . . . . :   011
  Point size . . . . . . . . . . . :   *NONE
Form feed  . . . . . . . . . . . . :   *AUTOCUT
Separator drawer . . . . . . . . . :   *FILE
Separator program  . . . . . . . . :   *NONE
Printer error message  . . . . . . :   *INFO
Message queue  . . . . . . . . . . :   P01A01
  Library  . . . . . . . . . . . . :     QGPL
Current message queue  . . . . . . :   P01A01
  Library  . . . . . . . . . . . . :     QGPL
Activation timer . . . . . . . . . :   170
Inactivity timer . . . . . . . . . :   *SEC15
Line speed . . . . . . . . . . . . :   19200
Word length  . . . . . . . . . . . :   8
Type of parity . . . . . . . . . . :   *NONE
Stop bits  . . . . . . . . . . . . :   1
Host print transform . . . . . . . :   *YES
Manufacturer type and model  . . . :   *LEXOPTRAS
Paper source 1 . . . . . . . . . . :   *LETTER
Paper source 2 . . . . . . . . . . :   *LETTER
Envelope source  . . . . . . . . . :   *NUMBER10
ASCII code page 899 support  . . . :   *NO
Image configuration  . . . . . . . :   *NONE
Character identifier . . . . . . . :   *SYSVAL
Remote location:
  Name or address  . . . . . . . . :   10.10.222.43
Workstation customizing object . . :   *NONE
User-defined object  . . . . . . . :   *NONE
  Object type  . . . . . . . . . . :     *NONE
Data transform program . . . . . . :   *NONE
System driver program  . . . . . . :   *HPPJLDRV
Allocated to:
Job name . . . . . . . . . . . . . :   P01A01
  User . . . . . . . . . . . . . . :     QSPLJOB
  Number . . . . . . . . . . . . . :     620617
Published  . . . . . . . . . . . . :   *NO
Publishing information:
  Support duplex . . . . . . . . . :   *UNKNOWN
  Support color  . . . . . . . . . :   *UNKNOWN
  Pages per minute black . . . . . :   *UNKNOWN
  Pages per minute color . . . . . :   *UNKNOWN
  Location . . . . . . . . . . . . :   *BLANK
  Data streams supported . . . . . :   *UNKNOWN
Text . . . . . . . . . . . . . . . :   systems printer near programmers

It is hooked up to a Marknet X2000.

CreatePrint can handle the second drawer, with legal, just fine.

Rob Berendt
--
"All creatures will make merry... under pain of death."
-Ming the Merciless (Flash Gordon)
_______________________________________________
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing 
list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.




_______________________________________________
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing 
list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.