Re: Printing legal to another drawer -- MIDRANGE-L

× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.

Rob

is it an option to create another outqueue for legal using a WSCST that specifies the required drawer ?

The end result being one outqueue for the stuff you have working already and another modified outqueue for legal pointing to the same device ? (2 outqueues pointing to one IP printer should be OK, but buffering and timeout values need to be set correctly)

I realise this suggestion is probably only useful if this is an on-going requirement...

Regards
Evan Harris

Dave,

Troy got it working here after talking to IBM.  Seems there are two
solutions:
1)  when you want to use legal, you have to
a)  Stop the writer
b)  Vary the device off
c)  Change some parameters on the device description
d)  Vary the device back on
e)  Start the writer
Switching back is a reversal of the steps.
2)  Or you can use the WSCST.  However all printouts will then go to that
drawer.  That's not quite what we had in mind either.

Rob Berendt
--
"All creatures will make merry... under pain of death."
-Ming the Merciless (Flash Gordon)

This mailing list archive is Copyright 1997-2025 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.