RE: Change a Serial Number?

["Ingvaldson, Scott" <SIngvaldson@xxxxxxxxxxxx>]

>From the Hardware service manager choose option 1. - Packaging hardware
resources > option 5 on the Tape Library displays the detail > F9 allows you
to change it.  Two zeros will be added to the serial number when you do
this, possibly to show that it was manually changed. (e.g. 13-00xxxxx)

Regards,

Scott Ingvaldson
AS/400 System Administrator
GuideOne Insurance Group

-----Original Message-----
date: Fri, 2 Jan 2004 16:14:38 -0600 
from: Dennis Munro <DMunro@xxxxxxxxxxxxxxxxxxxx>
subject: RE: Change a Serial Number?

I did look at STRSST but did not find anything that would let me change the
serial number.  As close as I could get was to change the description from
"TAP02" to whatever but that didn't get at the serial number but it showed
it.  When I printed out the system config from the Hardware Service Manager,
it showed the 3570 tape library but not the individual tape device????

Thanks - Dennis.

Dennis Munro

"I love deadlines. I especially like the whooshing sound they make as they
go flying by."
Dilbert's Words Of Wisdom

Badger Mining Corporation
www.badgerminingcorp.com
dmunro@xxxxxxxxxxxxxxxxxxxx
(920) 361-2388   Ext.141

   
This message and accompanying documents are covered by the Electronic
Communications Privacy Act, 18 U.S.C. §§ 2510-2521, and contains information
intended for the specified individual(s) only. This information is
confidential. If you are not the intended recipient or an agent responsible
for delivering it to the intended recipient, you are hereby notified that
you have received this document in error and that any review, dissemination,
copying, or the taking of any action based on the contents of this
information is strictly prohibited. If you have received this communication
in error, please notify us immediately by e-mail, and delete the original
message.