Re: signon failure - network neighborhood

look here:

WRKMBRPDM FILE(QUSRTOOL/QATTINFO) MBR(TZ*)

<snip>

Introduction
------------
With the introduction of the iSeries Support for Windows Network
Neighborhood
(iSeries NetServer) support in V4R2, it became apparent there was a need
for
an easier interface to configure the iSeries NetServer, work with file and
print shares, and to view this information.  The GO NETS tool was written
to provide a command interface to fill this need.  It provides command
interfaces to the iSeries NetServer APIs, and a menu over the commands.
</snip>


-------------------------
 Bryan Dietz
3X Corporation
614-410-9205






                                                                           
             Jerry                                                         
             <jdraper@trilosof                                             
             t.com>                                                     To 
             Sent by:                  Midrange Systems Technical          
             midrange-l-bounce         Discussion                          
             s@xxxxxxxxxxxx            <midrange-l@xxxxxxxxxxxx>           
                                                                        cc 
                                                                           
             09/22/2003 08:42                                      Subject 
             PM                        Re: signon failure - network        
                                       neighborhood                        
                                                                           
             Please respond to                                             
             Midrange Systems                                              
                 Technical                                                 
                Discussion                                                 
             <midrange-l@midra                                             
                 nge.com>                                                  
                                                                           
                                                                           




we are on v5r2.  can you be slightly more specific?

jerry


Quoting bdietz@xxxxxx:

>
>
>
>
> If you are on V5R2 and have installed the QUSRTOOL optional part of
OS/400
> there exists a green screen netserver config tool.  Look thru the QATTCL
> for the create program TZ--- something.  Works neat and has an option to
> see who is disabled for netserver support.
>
>
> -------------------------
>  Bryan Dietz
> 3X Corporation
>
>
> So far that is the only place I have seen it.  Nothing on the green
screen
> side.
>
> ------------------
>
> Actually iSeries Navigator is quite good at this:
> My Connections
>  Network
>   Servers
>    TCP/IP
>     Right click on iSeries NetServer and select disabled user id's
>
>
>
> _______________________________________________
> This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list
> To post a message email: MIDRANGE-L@xxxxxxxxxxxx
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/mailman/listinfo/midrange-l
> or email: MIDRANGE-L-request@xxxxxxxxxxxx
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/midrange-l.
>
>
>


_______________________________________________
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.