RE: Complete Box Swap 620 @ V4R5 to 810 LPAR @ V5R2 -whattowat ch for, etc. -- MIDRANGE-L

We are not NEARLY as complicated as big shops Rob.

And I was looking for anything I might be spacing since I have not done any
kind of box upgrade in a LONG time and ditto on a box swap (S/38 to AS/400)
:-)

Chuck


-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of rob@xxxxxxxxx
Sent: Tuesday, August 19, 2003 1:43 PM
To: Midrange Systems Technical Discussion
Subject: RE: Complete Box Swap 620 @ V4R5 to 810 LPAR @ V5R2 - whattowat ch
for, etc.

If "nothing" is coming over then why the email to the list?  :-)
There are just so many objects not within libraries anymore, and so many 
other configurations, etc, that if you could upgrade first then do a GO 
SAVE, 21, you'd be far better off.

Rob Berendt
-- 
"They that can give up essential liberty to obtain a little temporary 
safety deserve neither liberty nor safety." 
Benjamin Franklin 





"Chuck Lewis" <clewis@xxxxxxxxxx>
Sent by: midrange-l-bounces@xxxxxxxxxxxx
08/19/2003 12:38 PM
Please respond to Midrange Systems Technical Discussion
 
        To:     "'Midrange Systems Technical Discussion'" 
<midrange-l@xxxxxxxxxxxx>
        cc: 
        Fax to: 
        Subject:        RE: Complete Box Swap 620 @ V4R5 to 810 LPAR @ 
V5R2 - what towat       ch      for, etc.


Rob,

Thanks and I would shudder too - if I was doing a box upgrade. We are 
doing
a "box SWAP" thankfully and nothing is coming over :-)

Chuck


-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of rob@xxxxxxxxx
Sent: Tuesday, August 19, 2003 11:47 AM
To: Midrange Systems Technical Discussion
Subject: RE: Complete Box Swap 620 @ V4R5 to 810 LPAR @ V5R2 - what towat 
ch
for, etc.

A 620?  I shudder to think of all the hardware on that which might be 
incompatible with V5R2.  However, if you can, they I would strongly 
recommend upgrading it to V5R2 first.  Then, in theory, the IBM team could 

take the save and restore it into the LPAR just fine.  Providing the tape 
drive on the new machine is compatible.  Maybe they could even configure 
the old drive into the new machine.  Check obsoleted hardware carefully. I 

know that numerous tape drives have died between 45 and 52.

Rob Berendt
-- 
"They that can give up essential liberty to obtain a little temporary 
safety deserve neither liberty nor safety." 
Benjamin Franklin 
_______________________________________________
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing 
list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.



_______________________________________________
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing 
list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.


_______________________________________________
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.