Re: CWBDB0058

Philipp,

The point about checking that QUSER has MAXSTG(*NOMAX) is a good one.  A 
long time ago in a cornfield far far away, IBM used to ship AS/400 systems 
with MAXSTG(3176) for QUSER, and if these systems have been upgraded over 
the years this may not have been changed.

There are also some V5R2 PTF's that may help - SI08923, SI08871 & MF30604.
Also check this link for TCP/IP stack PTF's:
http://www-1.ibm.com/support/docview.wss?uid=nas1d890cb0927aa56ad86256a3100633d95&rs=110

Also, a less drastic solution than an IPL or ENDTCP *IMMED and STRTCP if 
this problem occurs and nothing else seems to be helping:
1) ENDHOSTSVR ALL
2) DLTUSRSPC QUSRSYS/QYSMSVRE
3) STRHOSTSVR *ALL

...Neil




Philipp Rusch <Philipp.Rusch@xxxxxxxxxxxx> 
Sent by: midrange-l-bounces@xxxxxxxxxxxx
2003/06/02 15:25



To
Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx>
cc

Subject
Re: CWBDB0058






I've had this type of error when the staff restored some libs after 
upgrade without excluding
QGPL and QUSRSYS. Afterwards nearly all TCPIP "prestarted jobs" seemed to 
start and
then stopped immediately after. I reinstalled option 12 of SS1 and 
TC1-licpgm, and  it worked
again, using CA Express V4R4, V4R5 and V5R2, no difference.
If having problems with CAWIN connections, always check on QUSER profile, 
max storage
should be *NOMAX, look if it is not *DISABLED and refresh the password.

HTH, Philipp Rusch

"Smith, Dave" schrieb:

> HELP!
>
>
>
> I have a client and their iSeries access data transfer quit working 
today (it was working this morning but now its not.)   The error I am 
getting is: CWBDB0058 Unable to start database server due to 
communications error.
>
>
>
> Their system was upgraded to V5R2 last week but they have done transfers 
since.  I've gone through STRPJ on QZDAINIT now in library QSYS (says 
itÃââs already started).   I've done a STRHOSTSVR *ALL and IÃââve run 
CWBPING which gives me a CWBCO1008 - Unable to connect to server 
application Data Access, Returned 8006.   I also got the same thing on 
application Network Print.  I ended the PJ and restarted it and even had 
the luxury of being able to IPL the system (No comments please)   I get 
the same error on all PCÃââs that attempt an iseries access transfer.   I 
canÃâât find any error messages via the green screen side.  iSeries 
Navigator says the database server is running, IÃââm not seeing any other 
error messages and everything else seems to be working.

>
>
> David Smith