RE: V4R5 to V5R2

["Goodbar, Loyd (AFS-Water Valley)" <LGoodbar@xxxxxxxxxxxxxx>]

Did you have any "unsupported" or "partially supported" hardware on the 720
to be replaced by the upgrade?
I'm also running a 720 at V4R5 looking toward V5R2, and identified several
cards that fit the above categories:

V4R5 hardware                                   V5R1 replacement
V5R2 replacement
2609 two line adapter                           2745 PCI two line WAN IOA
same
2612 EIA 232/V.24 one line adapter              2745 PCI two line WAN IOA
same
2621 IOP (3995 C42 optical library)             6534, 2729, or 2749 IOP
2729 PCI Ultra Mag Media Controller
2664 Integrated fax adapter                     9771 or 2772 integrated
modem           same
2668 Wireless LAN adapter                       Lan attached wireless access
point   same
6050 Twinaxal workstation controller    2746 PCI twinaxal workstation IOA
same

Thanks,
Loyd

--
Loyd Goodbar
Programmer/analyst
BorgWarner Incorporated
ETS/Water Valley
662-473-5713


-----Original Message-----
From: MWalter@xxxxxxxxxxxxxxx [mailto:MWalter@xxxxxxxxxxxxxxx] 
Sent: Thursday, March 27, 2003 2:26 PM
To: Midrange Systems Technical Discussion
Subject: Re: V4R5 to V5R2

..see Inline.


Thanks,

Mark

Anybody who has done this what was your approx time

I will need to

apply 4.5 cume, groups and hipers
 -- Did the previous weekend
    Just loaded the cum on Friday and scheduled an IPL. Worked fine savsys
(x2)
 -- Replaced our normal save with Option 21 the night before. install 5.2
 -- Started at about 7:30 AM finished about 4:30 PM.
apply 5.2 cume, group, hipers
 -- Did the next day. This part only took about 2 hrs.

I had the leisure of having the system for the entire weekend.



DASD is 54.5 Gb @ approx. 80% usage
 -- Ours is about 90 GB at 70%. (Model 720)

Mark Allen