× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



Is the 170 attached to a HUB or a SWITCH ? A lot of HUBS are *half duplex.
I had a problem once after and OS upgrade where the 400 wasn't auto detecting
correctly and manual settings of other than 10 and half would not work.
I finally did a rtvcfgsrc, deleted the line and re-created it. Everything
worked fine afterwards.

__________________________________________________
Kirk Goins
IBM Certified iSeries Technical Solutions Expert
IBM Certified Designing IBM e-Business Solutions
Pacific Information Systems - An IBM Premier Business Partner
503-674-2985           kirkg@pacinfosys.com


-----Original Message-----
From: Jay Maynard [mailto:jmaynard@conmicro.cx]
Sent: Friday, October 04, 2002 8:52 AM
To: midrange-l@midrange.com
Subject: 2838 10/100 Ethernet adapter full duplex mode


My 170 has a 2838 PCI 10/100 Ethernet adapter in it. I've got the line
defined as DUPLEX(*FULL). When the system is first powered up, the
full-duplex light on the Ethernet switch comes on, but it turns off during
IPL. If I ENDTCP, then vary the line off and change the line's description
with CHGLINETH (well, the menu display that does that) without actually
changing any parameters, the full duplex light turns back on, and stays on
after the line is varied active and STRTCP is run. What's going on here? I'm
running 5.1, now, for those who weren't reading about my trials and
tribulations with that upgrade.
_______________________________________________
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@midrange.com
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l
or email: MIDRANGE-L-request@midrange.com
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.



As an Amazon Associate we earn from qualifying purchases.

This thread ...

Follow-Ups:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.