Re: Why is my Operations Console connection failing

----- Original Message -----
From: "Andy Nolen-Parkhouse" <aparkhouse@attbi.com>
To: <midrange-l@midrange.com>
Sent: Wednesday, September 04, 2002 11:56 AM
Subject: RE: Why is my Operations Console connection failing


> Nathan,
>
> I don't have specifics, but I think that you may need to remove your
> current configuration and then proceed with a new configuration with the
> Operations Console cable connected to your comm port.  Since you have
> only one serial port, then your laptop should probably not get a whiff
> of the Control Panel cable.
>
> Perhaps that's what you had attached when your first configured the
> laptop?
>
> Regards,
> Andy Nolen-Parkhouse
>
> > On Behalf Of Nathan M. Andelin
> > Subject: Re: Why is my Operations Console connection failing
> >
> > > From: "Jim Langston"
> > > When you configure the port on your PC you configure a
> > > COM port for the Remote Console or the Control Panel,
> > > not both.
> >
> > Thanks, Jim.  But what do you mean by configure a COM port?
> >
> > As I mentioned previously:
> >
> > One thing that puzzles me is the following panel in the operations
> console
> > setup wizard, which prompts for 3 options, but only the second one is
> > enabled.  Why wouldn't the "Console Only" option be enabled, for
> example?
> >
> > ---------------------
> >
> > Select which Operations Console functions you want to use with this
> AS/400
> > system
> >
> > () Remote Control Panel and Console
> > () Remote Control Panel Only
> > () Console Only
> >
> > ---------------------
> >
> > Is there some configuration setting that would enable the 'Console
> Only'
> > radio button?
> >
> > Thanks,
> >
> > Nathan M. Andelin
>
> _______________________________________________
> This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list
> To post a message email: MIDRANGE-L@midrange.com
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l
> or email: MIDRANGE-L-request@midrange.com
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/midrange-l.
>