RE: Step by Step setup of a 2771 for Service Director

It is done from OPS Nav. using a wizard.  If you select the 800 number for
dial-out be sure to use the 2nd one.  The first 800 # in the list is not
usable.

Note: I had one to set up as my ECS modem in an LPARed system in P0.
Problem was P0 didn't have an Ethernet IOA.  I could not get to P0 from my
PC with OPS Nav..  2nd catch is that Ethernet IOA may require another IOP as
a minimal P0 would not normally be planned to have a NIC.


 ---
Douglas Hart - Sr. Consultant
Certified IBM iSeries System Administrator
mailto:dhart@twcny.rr.com


> -----Original Message-----
> From: midrange-l-admin@midrange.com
> [mailto:midrange-l-admin@midrange.com]On Behalf Of
> bacollins@verinettech.com
> Sent: Wednesday, August 07, 2002 6:09 PM
> To: midrange-l@midrange.com
> Subject: Step by Step setup of a 2771 for Service Director
>
>
>
> Does anyone have a link to show a step by step setup of the 2771 Card. I
> checked through the archives and nothing really helps. The line just goes
> into a failed state. I am using I am running a 270 with V5R1.
>
>  Opt  Resource        Type  Status                Text
>       CMB01           284D  Operational           Combined function IOP
>         LIN01         2771  Operational           Comm Adapter
>           CMN01       2771  Operational           Comm Port
>           CMN02       2771  Operational           Comm Port
>
> I have tried both ports and no luck.
>
> TIA
>
> Bruce "Hoss" Collins
>
>
>
> _______________________________________________
> This is the Midrange Systems Technical Discussion (MIDRANGE-L)
> mailing list
> To post a message email: MIDRANGE-L@midrange.com
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l
> or email: MIDRANGE-L-request@midrange.com
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/midrange-l.
>
>