RE: Answered QSYSOPR messages show as unanswered

The following messages still show in QSYSOPR msgq as unanswered although
they were all answered with a D by the user (programmer) three hours ago:

Decimal-data error occurred (C G D F).
  Reply . . .
Decimal-data error occurred (C G D F).
  Reply . . .
CEE9901 received by EQ120C at 7900. (C D I R)
  Reply . . .
CEE9901 received by EQ120C at 7900. (C D I R)
  Reply . . .
MCH1202 received by EQ120C at 7800. (C D I R)
  Reply . . .
CEE9901 received by EQ120C at 7900. (C D I R)

Are the messages still showing as unanswered in QSYSOPR msgq because the
programmer dumped the job?  And anytime this happens
I am going to have messages that look like they need answers?


-----Original Message-----
From: Mike.Crump@saint-gobain.com [mailto:Mike.Crump@saint-gobain.com]
Sent: Wednesday, May 15, 2002 12:18 PM
To: midrange-l@midrange.com
Subject: RE: Answered QSYSOPR messages show as unanswered



Bryan,

One question is, have you checked the QHST log to make sure it does not
disply an unanswered message?

My experience has been that the only messages that get left out there are
ones from a job that was cancelled.  QHST should show two messages for each
message requiring a response - once initially and once again when the
message is replied to.  To my knowledge there is no way to actually
associate the two messages together except for their text and originating
job.  Is it possible that the job is issuing the same message more than
once?  If you find responses with a 'R' this can be very typical.
Therefore you would have to check QHST for all occurences within a
timeframe and then determine if a answer was really unanswered.

Found 213102; expected 213099 on device TAP05. (C I INZ R)

Found 213102; expected 213099 on device TAP05. (C I INZ R)
C

Michael Crump
Saint-Gobain Containers
1509 S. Macedonia Ave.
Muncie, IN  47302
(765)741-7696
(765)741-7012 f
(800)428-8642

mailto:mike.crump@saint-gobain.com



_______________________________________________
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@midrange.com
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l
or email: MIDRANGE-L-request@midrange.com
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.