Re: Decision Data ES/PCI Twinax card and Windows 98SE

I guess you noticed that it referred to a "WS IOP detected busy time-out
from device".... To me, this points to the "clocking problem" I read
about.... The WS controller is very particular about what it expects
in the way of a signal. I would plan on getting another card or an
older PC. (Knowing this isn't great ideas on fixing the problem)

What does the VENDOR of the emulation card say ????



Neil Palmer wrote:
>
> All I see on the 400 is that it recognizes a card, auto-configs a device
> (3196 in this case, based on the emulation mode selected) then the device
> (session) crashes with:
> Message ID . . . . . . :   CPI9350       Severity . . . . . . . :   70
> Message type . . . . . :   Information
> Message . . . . :   Error with device *N on work station controller CTL01.
>
> Cause . . . . . :   Work station controller CTL01 detected an error in
> either
>   a command or data sent by device *N.
>
> Error log showed:
>                                          Serial
>  Resource          Type      Model       Number                  Address
>
>  DEVICE            3196       0A1        00-00000 0020-000102FF
>
>  Error log ID  . . . . . . :   00023143     Sequence . . . . . . : 38260
>  Date  . . . . . . . . . . :   05/02/02     Time . . . . . . . . :
> 14:24:56
>  Reference code  . . . . . :   0191         Error code . . . . . :
> 00000000
>  Table ID  . . . . . . . . :   26610001     IPL source . . . . . :   B
>  Error type  . . . . . . . :   Permanent
>  Description . . . . . . . :
>  WS IOP detected busy time-out from device
>