Re: Decision Data ES/PCI Twinax card and Windows 98SE

["Neil Palmer" <neilp@xxxxxxxxxxx>]

No - it's a small shop with an AS/400 model 200.  Twinax directly attached
to WSC block on 400.

...Neil





Philipp Rusch <Philipp.Rusch@rusch-edv.de>


        To:     midrange-l@midrange.com
        cc:
        Subject:        Re: Decision Data ES/PCI Twinax card and Windows 98SE


Hello Neil,
is this card connected directly to the AS/400 twinax controller or through
any other means ? Is this perhaps the problem with the new models of
twinax-controllers running 2 Mbit "double mode" instead of the old speed
(1 MBit). (You know, where  the data area has to be filled to reduce
the speed of the twinax-controllers to the old standards ...)

Regards from Germany, Philipp Rusch

Neil Palmer schrieb:

> Anyone have any success with the above combination ?
> Have a customer (who installed this and actually got a signon display
for
> a few seconds, then the session crashed.
> They replaced the card, same problem.
> The PC is a Dell Optiplex GX150, PIII 1GHz, 256 SDRAM, running Windows
> 98SE.
>
> ...Neil