RE: Backup power supplies

["Ed Chabot" <echabot@xxxxxxxxxxxxxxxxxx>]

Reeve,
Thanks to you and all who offered/continue to offer ideas.  I'll make this
the last "thanks for the info" reply but do extend it to everyone that gives
any info or insight.  I can't help it, I was raised to say "thank you" but I
realize that I tend to overdo it in this type of forum.  My thanks and
apologies to all.

Ed Chabot
The Marlin Firearms Company
100 Kenna Drive
North Haven, CT 06473
(203)985-3254

-----Original Message-----
From: midrange-l-admin@midrange.com
[mailto:midrange-l-admin@midrange.com]On Behalf Of Reeve Fritchman
Sent: Monday, November 26, 2001 4:22 PM
To: midrange-l@midrange.com
Subject: RE: Backup power supplies


Get a beefy UPS.  The generator part is not expensive (you have lots of
options: diesel, natural gas, etc.); the automatic transfer switch is
usually the expensive part.  If the power goes out and doesn't come back el
prompto, somebody's got to hit the "start" button on the gen set and
transfer the UPS input from "line" to "generator" (the UPS is always in the
circuit, right before the load).  When the power's back on, you transfer the
UPS input from gen set back to line and let the gen set cool down before
shutting it down.

Are you going to power anything other than the AS/400: telephone, emergency
lighting, key production machinery (CNC), PC's?  You plant engineer will
have some ideas and requirements; you'll need to run your generator weekly
for a couple of hours to make sure everything continues to work.

Hey...at least you don't have to worry about being overrun by losers with
boxcutters!

 -----Original Message-----
From:   midrange-l-admin@midrange.com [mailto:midrange-l-admin@midrange.com]
On Behalf Of Ed Chabot
Sent:   Monday, November 26, 2001 3:43 PM
To:     MIDRANGE-L@midrange. com
Subject:        Backup power supplies

We are considering some kind of backup power solution, like a generator, to
keep our AS/400 up in the event of a power outage in our area.  Does anybody
have any insight, recommendations, experiences, etc?  Any info is
appreciated.  Thanks.

Ed Chabot
The Marlin Firearms Company
100 Kenna Drive
North Haven, CT 06473
(203)985-3254

_______________________________________________
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@midrange.com
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l
or email: MIDRANGE-L-request@midrange.com
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.


_______________________________________________
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@midrange.com
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l
or email: MIDRANGE-L-request@midrange.com
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.