RE: Backup power supplies

["Ed Chabot" <echabot@xxxxxxxxxxxxxxxxxx>]

Rob,
If possible and timely, could you keep me/us updated on your progress?
Thanks.

Ed Chabot
The Marlin Firearms Company
100 Kenna Drive
North Haven, CT 06473
(203)985-3254

-----Original Message-----
From: midrange-l-admin@midrange.com
[mailto:midrange-l-admin@midrange.com]On Behalf Of rob@dekko.com
Sent: Monday, November 26, 2001 4:22 PM
To: midrange-l@midrange.com
Subject: RE: Backup power supplies



We are in the process of looking at generators and replacing our UPS also.
When we get the generator we were instructed to put more stuff on it -
likes lights, air conditioning, etc.  Not only are these things more
critical in a longer time frame (you could do without air conditioning for
45 minutes but not a day or so) but their constant load is actually better
for the generator.  It was once explained to me where it made sense but I
forget the exact words.

We are still in the early stages.  We were looking at Leibert.  Also a
company called Generac.
http://generac.com/
Boss is hearing a lot of good things about them.
The status is "It's still in our budget.  XXXX from facilities is handling
this."

Rob Berendt

==================
"They that can give up essential liberty to obtain a little temporary
safety deserve neither liberty nor safety."
Benjamin Franklin



                    "Ed Chabot"
                    <echabot@marlinfire       To:
<midrange-l@midrange.com>
                    arms.com>                 cc:
                    Sent by:                  Fax to:
                    midrange-l-admin@mi       Subject:     RE: Backup power
supplies
                    drange.com


                    11/26/2001 03:56 PM
                    Please respond to
                    midrange-l






Ron,
Thanks, we are more concerned (right now anyway) with keeping the system up
for a remote site that might not be having the same power interruption that
we would experience.  Because they are now running on our AS/400, we would
lose the production or shipping for two sites not to mention the political
egg on our face because "they didn't have these kind of problems before we
moved them onto our AS/400" kind of thing.  Was it a large manufacturing
site?  I can't imagine the size generator we would need to keep things
running here but then again maybe I just don't know what is out there for
this kind of thing.

Ed Chabot
The Marlin Firearms Company
100 Kenna Drive
North Haven, CT 06473
(203)985-3254

-----Original Message-----
From: midrange-l-admin@midrange.com
[mailto:midrange-l-admin@midrange.com]On Behalf Of Klein, Ron
Sent: Monday, November 26, 2001 3:49 PM
To: 'midrange-l@midrange.com'
Subject: RE: Backup power supplies


Ed,
I worked at a manufacturing company that had a backup generator.  We had a
UPS in place that would takeover for the time it took for the generator to
get up and going.  Of course only the things on that UPS had no problems
when the power switched.  Any terminal that was signed on would vary itself
off and then would have to be reset.  The company would switch to generator
backup at peak demand times when the weather was extremely hot or extremely
cold.  The comapny was able to negotiate better power rates by agreeing to
this arrangment.  The only problem we actually had was the one I mentioned
about things getting varies off.

Ron

> -----Original Message-----
> From:         Ed Chabot [SMTP:echabot@marlinfirearms.com]
> Sent:         Monday, November 26, 2001 2:43 PM
> To:           MIDRANGE-L@midrange. com
> Subject:           Backup power supplies
>
> We are considering some kind of backup power solution, like a generator,
> to
> keep our AS/400 up in the event of a power outage in our area.  Does
> anybody
> have any insight, recommendations, experiences, etc?  Any info is
> appreciated.  Thanks.
>
> Ed Chabot
> The Marlin Firearms Company
> 100 Kenna Drive
> North Haven, CT 06473
> (203)985-3254
>
> _______________________________________________
> This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
> list
> To post a message email: MIDRANGE-L@midrange.com
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l
> or email: MIDRANGE-L-request@midrange.com
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/midrange-l.
_______________________________________________
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@midrange.com
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l
or email: MIDRANGE-L-request@midrange.com
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.


_______________________________________________
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@midrange.com
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l
or email: MIDRANGE-L-request@midrange.com
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.





_______________________________________________
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@midrange.com
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l
or email: MIDRANGE-L-request@midrange.com
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.