Re: IWS4032 error

["Steve Richter" <srichter@xxxxxxxxxxxxx>]

-----Original Message-----
From: M. Lazarus <mlazarus@ttec.com>
To: midrange-l@midrange.com <midrange-l@midrange.com>
Date: Thursday, August 23, 2001 11:48 PM
Subject: Re: IWS4032 error


>  It turns out that the solution was to change the PC5250 session default
>to allow 27x132!
>
>  -mark
>


any idea why?

Steve Richter


>At 8/22/01 07:32 AM -0400, you wrote:
>>Depending on what version of OS/400 you are using there may be a PTF:
>>
>>  SF44835 420 OSP STRPCO COMMAND IS NOT ALLOWED IN A TELNET SESSION
>>  SF39294 360 OSP STRPCO COMMAND IS NOT ALLOWED IN A TELNET SESSION
>>  SF39120 310 OSP STRPCO COMMAND IS NOT ALLOWED IN A TELNET SESSION
>>  SF44124 410 OSP STRPCO COMMAND IS NOT ALLOWED IN A TELNET SESSION
>>  SF39409 370 OSP STRPCO COMMAND IS NOT ALLOWED IN A TELNET SESSION
>>  SF39121 320 OSP STRPCO COMMAND IS NOT ALLOWED IN A TELNET SESSION
>
><Mark wrote>
>
>>   I am using the older version of CA (3.2, not CA Express) and I am
>>receiving message IWS4032 "STRPCO can only be run from a programmable
>>workstation."
>>
>>   STRPCO works from at least one workstation on the network, but not some
>>others.  These are ALL PCs and I'm pretty sure that they are on the same
>>network.
>>