Re: IWS4032 error

["M. Lazarus" <mlazarus@xxxxxxxx>]

Bryan,

  It turns out that the solution was to change the PC5250 session default
to allow 27x132!

  -mark

At 8/22/01 07:32 AM -0400, you wrote:
>Depending on what version of OS/400 you are using there may be a PTF:
>
>  SF44835 420 OSP STRPCO COMMAND IS NOT ALLOWED IN A TELNET SESSION
>  SF39294 360 OSP STRPCO COMMAND IS NOT ALLOWED IN A TELNET SESSION
>  SF39120 310 OSP STRPCO COMMAND IS NOT ALLOWED IN A TELNET SESSION
>  SF44124 410 OSP STRPCO COMMAND IS NOT ALLOWED IN A TELNET SESSION
>  SF39409 370 OSP STRPCO COMMAND IS NOT ALLOWED IN A TELNET SESSION
>  SF39121 320 OSP STRPCO COMMAND IS NOT ALLOWED IN A TELNET SESSION

<Mark wrote>

>   I am using the older version of CA (3.2, not CA Express) and I am
>receiving message IWS4032 "STRPCO can only be run from a programmable
>workstation."
>
>   STRPCO works from at least one workstation on the network, but not some
>others.  These are ALL PCs and I'm pretty sure that they are on the same
>network.
>
>   Any ideas?
>
>   Thanks.
>
>   -mark