• Subject: Re: Connecting CA Express via Internet to AS/400
  • From: "Peter Dow" <pcdow@xxxxxxxxxxxxxxx>
  • Date: Sun, 19 Nov 2000 11:22:02 -0800

Hi Gary,

With CAE there is no central "connections" application; each application has
its own configuration where you specify the system name. For example, in the
PC5250 emulator program, there is a Communication menu. That has a submenu
of Configure. On the Configure window, there is a System name at the top.
That's where you specify the static domain name.

hth,
Peter Dow
Dow Software Services, Inc.
909 425-0194 voice
909 425-0196 fax


----- Original Message -----
From: "Gary Kuznitz " <docfxit@thegrid.net>
To: <MIDRANGE-L@midrange.com>
Sent: Saturday, November 18, 2000 8:35 PM
Subject: Re: Connecting CA Express via Internet to AS/400


> Hi Booth,
>
> Thanks.  I'm sure it will work great after I get it configured.  I can't
find
> where within CA Express to put the domain name so it will start talking.
It
> doesn't accept a domain name when you go into "Start or configure a
Session"
>
> Thanks,
>
> Gary Kuznitz
>
> On 19 Nov 2000, at 3:45, booth@martinvt.com wrote:
> > Gary, can you ping the AS/400 from the "run" line in Windows on your
> > PC? Until you can do that, you'll never connect.  The problem i always
> > have is getting the right IP address for the AS/400, but then it
> > should work great. _______________________ Booth Martin
> > Booth@MartinVT.com http://www.MartinVT.com
> _______________________
> >
> >
> >
> >
> > "Gary Kuznitz " <docfxit@calwest.net>
> > Sent by: owner-midrange-l@midrange.com
> > 11/18/2000 07:16 PM
> > Please respond to MIDRANGE-L
> >
> >
> >         To:     MIDRANGE-L@midrange.com
> >         cc:
> >         Subject:        Connecting CA Express via Internet to AS/400
> >
> > IBM does it again.  They think nobody works on a Saturday.  I can't
> > access the manuals over the internet  Their servers must be down.  Is
> > Microsoft running the show there?
> >
> > I'm trying to figure out how to configure Client Access Express to
> > connect to an AS/400 signon screen over the internet.  The 400 side is
> > connected to the internet and I know the domain name.  I'm trying to
> > figure out how to configure the remote PC.  The remote PC is connected
> > to the internet and it has CA Express loaded.  I have been looking
> > through the Midrange Archives for hours and I am totally surprised I
> > can't find anyone else that has answered this question before.  I sure
> > would appreciate it if someone could let me know without pointing me
> > to the books since they aren't available to me right now.
> >
> > Thank you very much,
> >
> > Gary Kuznitz
>
>
>
> +---
> | This is the Midrange System Mailing List!
> | To submit a new message, send your mail to MIDRANGE-L@midrange.com.
> | To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
> | To unsubscribe from this list send email to
MIDRANGE-L-UNSUB@midrange.com.
> | Questions should be directed to the list owner/operator:
david@midrange.com
> +---

+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---

This thread ...

Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2019 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available here. If you have questions about this, please contact [javascript protected email address].