RE: Correlating *SAVF "records" to FTP job I/O count

[Chris Bipes <rpg@xxxxxxxxxxxxxxx>]

Yes and No.  How is the remote AS400 attached to the local AS400s LAN?  Are
they on the same subnet?  If not what is the speed of the link between the
two subnets.  
For instance, we have to AS400s on the same hub. One is 100M Full Duplex and
the other is 10M Half Duplex.  Data transfer is lightning fast.  A third
resides on another subnet and is connected at 100M Full Duplex.  The two
subnets are linked via a pair of routers with a frame like at 128k.  Not as
fast as the two on the same hub even with one at 10M Half Duplex.  So the
connection speed is as slow as the slowest link.


Christopher K. Bipes     mailto:ChrisB@Cross-Check.com
Sr. Programmer/Analyst   mailto:Chris_Bipes@Yahoo.com
CrossCheck, Inc.         http://www.cross-check.com
6119 State Farm Drive    Phone: 707 586-0551 x 1102
Rohnert Park CA  94928 Fax: 707 586-1884

If consistency is the hobgoblin of little minds, only geniuses work here.
Karen Herbelin - Readers Digest 3/2000


-----Original Message-----
From: Bale, Dan [mailto:DBale@lear.com]
Sent: Wednesday, May 03, 2000 11:50 AM
To: 'MIDRANGE-L@midrange.com'
Subject: RE: Correlating *SAVF "records" to FTP job I/O count


Thanks for the tip.  Using CFGTCP option 1 [WRKTCPSTS OPTION(*IFC)], I found
the line description.  
The "Display TCP/IP Interface Status" shows the MTU = 1492 and the Line Type
= *ELAN

The "Display Line Description" shows both the Line Speed and the Current
Line Speed as 10M (10 million bits per second).  The maximum frame size is
1496.

Is tracert available on the 400?

I did a ping to the remote 400 I was having complaints about and a summary
of the results shows:
   Round-trip (in milliseconds) min/avg/max = 46/67/95             
   Connection verification statistics: 20 of 20 successful (100 %).
I used all of the default values on the ping command (except for the
NbrPkt(20) ).
Does this indicate anything significant?
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---