RE: 720 with V4R4 and Perle Controllers.

[Chris Bipes <rpg@xxxxxxxxxxxxxxx>]

We have recently attached a Perle 594E to our network in a remote office.
It has been rock solid.  We connected the remote site via ADTRAN CSU/DSU's
running both data and Voice over a point to point T1.  We are using
Compatible routers to route the TCP/IP and Anynet to connect the Perle.
Contact me privately if you want more info.  I can save the cfg objects and
FTP to you.

Christopher K. Bipes     mailto:ChrisB@Cross-Check.com
Sr. Programmer/Analyst   mailto:Chris_Bipes@Yahoo.com
CrossCheck, Inc.         http://www.cross-check.com
6119 State Farm Drive    Phone: 707 586-0551 x 1102
Rohnert Park CA  94928 Fax: 707 586-1884

*Note to Recruiters
Neither I, nor anyone that I know of, is interested in any new and/or
exciting positions. Please do not contact me.


-----Original Message-----
From: Barry Kolochuk [mailto:barryk@arnoldbr.com]
Sent: Wednesday, February 16, 2000 6:32 PM
To: MIDRANGE
Subject: 720 with V4R4 and Perle Controllers.


Is anyone out there running a 720 with Perle 594E controllers running
all your local screens. I have 2 594e Perle controllers attached to my
720 via ethernet and using DLC and I have also tried TCPIP. My 720 is
at V4R4 and my Perles are at software V4.30. In either configuration
the Perles will run for hours at a time but eventually drop
communication. I then have to reboot the Perles in order to get my
screens up again. I am wondering if anyone else has come across a
similar problem.

Tks Barry
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---