Re: 720 with V4R4 and Perle Controllers.

[Larry Bolhuis <lbolhui@xxxxxxx>]

We have several customers with similair setups. Some are 494Es, some are TCP/IP
some DLC for the connection.  The Perles are both Local and Remote and OS are
V4R2, R3 and R4.  Anywhere from a few devices to 16 full twinax ports.  No
reports of problems.  I can't verify the Perle software version specifically but
they are current.

Are there any other devices on the LAN that are dropping?  You have multiple 
594s
and they are all doing this??  My first guess would be some sort of LAN problem
maybe or maybe not on the AS/400.

 HTH - Larry


Barry Kolochuk wrote:
> 
> Is anyone out there running a 720 with Perle 594E controllers running
> all your local screens. I have 2 594e Perle controllers attached to my
> 720 via ethernet and using DLC and I have also tried TCPIP. My 720 is
> at V4R4 and my Perles are at software V4.30. In either configuration
> the Perles will run for hours at a time but eventually drop
> communication. I then have to reboot the Perles in order to get my
> screens up again. I am wondering if anyone else has come across a
> similar problem.
> 
> Tks Barry
-- 
Larry Bolhuis         |         What if it's True?
Arbor Solutions, Inc  |
(616) 451-2500        |  
(616) 451-2571 -fax   | 
lbolhui@ibm.net       |
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---