× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.


  • Subject: Re: TCP/IP over Leased line between AS/400's
  • From: pytel@xxxxxxxxxx
  • Date: Wed, 7 Jul 1999 15:06:17 -0500

How your leased line description is configured? I guess this is SDLC line
(CRTLINSDLC).
TCP/IP canot use SDLC line.
What you can do is to configure line as X.25 line with two PVCs (CRTLINX25).
AS/400 supports point-to-point X.25 lines. One of AS/400s should be configured
in DCE mode.
Then you can configure APPC controllers to use one PVC and TCP/IP interface to
use second PVC.
In this way you can run both traffics simultaneously - SNA/APPN and TCP/IP.
It should not be a problem, since you control both ends of the line.


Best regards
    Alexei Pytel



Billy Rowe <billyrowe@usa.net> on 07/07/99 11:52:21 AM

Please respond to MIDRANGE-L@midrange.com

To:   MIDRANGE-L@midrange.com
cc:    (bcc: Alexei Pytel/Rochester/IBM)
Subject:  TCP/IP over Leased line between AS/400's





We have 2 local AS/400's that are both on the same token ring, one of
these AS/400's is also on our Ethernet Lan with an NT server.   We have
3 remote AS/400's that are connected to the local AS/400(the one that is
on both token ring and ethernet) via leased lines.

The local AS/400 on both lan's is also the Network node(*NETNODE).

I have TCP/IP working between the 2 local AS/400's.

Will I be able to run TCP/IP over the leased lines to the remote
AS/400's along with the existing SNA traffic?

When I try to add the TCP/IP interface on a remote AS/400 and specify
the line description as the leased line I get the following message:

                         Additional Message
Information

 Message ID . . . . . . :   TCP263E       Severity . . . . . . . :
40
 Message type . . . . . :
Escape
 Date sent  . . . . . . :   07/07/99      Time sent  . . . . . . :
13:47:20

 Message . . . . :   LIND parameter value METAIRIE not
valid.
 Cause . . . . . :   The value specified for the line description
(LIND)
   parameter is not valid.  Reason code is 0001. Reason codes and
their
   meanings
follow:
 0001 - Line type not supported for
TCP/IP.


Any help/ideas will be appreciated!!


billy

+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---



+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---


As an Amazon Associate we earn from qualifying purchases.

This thread ...


Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.