RE: Part 2--model 200 IPL -further help required

Dave,

_DO_ try moving the terminal to another port/address - if the system is up
then it won't need the console.

I'm confused as to the QCONSOLE devd, I would have thought that
Auto-configure would create a new device (e.g. DSP01) and make this the
console - but I could be wrong.

As to a spare terminal... wasn't someone trying to sell a twinax card?

Brendan Bispham

~ I cant of course unplug main terminal and start going throught all the
~ eight ports and address"s etc because the golden rule is 'you must always
~ have the main system consule at port 0 address 0" so if this is happening
~ below Im in real trouble
~
~ Dave B

+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---