Part 2--model 200 IPL -further help required

system was working great before handed
over to me on another type of  terminal(not a 3197)--I only have a 3197 and
no other spare terminal 
and AS/400 has no ethernet card to hook up a PC to at this point in time.
I cant of course unplug main terminal and start going throught all the
eight ports and address"s etc because the golden rule is 'you must always
have the main system consule at port 0 address 0" so if this is happening
below Im in real trouble

Dave B

> From: Shadrach Scott 
> Subject: Re: Model 200 problem--how do I get out of trouble?
> Date: Thursday, 6 May 1999 22:47
> 
> I had a model 170 do this to me. The machine autoconfiged a second ctrl
and
> varied off the control with all of my twinax devices so that I had a
fantom
> controler out there with no devices attached to it. When I would manual
IPL
> I would get a screen until it was finished with the IPL then the screen
> would go a way. I was able to hook my ethernet line up blind though and
get
> in that way.
> 
> Good luck.
> 
> Shadrach Scott

+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---