RE: 7852-400

["Graap, Ken" <keg@xxxxxxxxxxxxxxx>]

>ANZPRB suggests 90% hardware
>failure but modem works at hardware suppliers.
>
>Any ideas?

You could try deleting all the ECS lines/controllers/devices and then call
program QTIINSTL.

This program recreates the ECS hardware configuration...

Then you would know that everything was configured correctly anyway...


Kenneth

--
********************************
         Kenneth  E.  Graap             
    IBM Certified Specialist                 
          AS/400   Professional                   
          System  Administrator                  
 NW Natural - Information Services        
           System Services                         
        503 226 4211 X5537                 
          FAX  503 721 2521                  
      keg@nwnatural.com               
********************************


-----Original Message-----
From: pytel@us.ibm.com [mailto:pytel@us.ibm.com]
Sent: Wednesday, April 28, 1999 1:18 PM
To: MIDRANGE-L@midrange.com
Subject: Re: 7852-400


Look at history log. Normally, when communication error occurs, system
sends short informational message to QSYSOPR and a couple of more
informative messages to history log. These will contain error code, which
can be traced to exact failure - carrier loss or smth.

Best regards
    Alexey Pytel



Chris.Chambers@v2music.com on 04/28/99 12:39:28 PM

Please respond to MIDRANGE-L@midrange.com

To:   midrange-l@midrange.com
cc:    (bcc: Alexei Pytel/Rochester/IBM)
Subject:  7852-400





While we are on the subject I am using one with a brand new AS400 4.3 and
initially trying to connect to ECS using the system supplied QESLINE. I get
nothing other than a message saying the CTL failed when performing
SNDPTFORD.

Initially the line was for HRDWRSC 'DC03' which I had to change to CMN01. I
vary on Line and then controller. I start SBS QCMN. I perform SNDPTFORD -
line fails. DIP switches are factory supplied. ANZPRB suggests 90% hardware
failure but modem works at hardware suppliers.

Any ideas?


+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to
MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator:
david@midrange.com
+---



+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator:
david@midrange.com
+---
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---