RE: Hyperterminal

[eric <eric@xxxxxxxxxx>]

Which version of Hyperterminal are you using - the one that comes with 
windows?  You may want to buy a more robust communications software.  We 
use Procomm Plus for our direct deposit file transfers.

Eric Kempter
CommAir Mechanical Services, Inc.


-----Original Message-----
From:   Carl Galgano [SMTP:cgalgano@ediconsulting.com]
Sent:   Friday, April 23, 1999 11:58 AM
To:     MIDRANGE-L@midrange.com
Subject:        Re: Hyperterminal

Angie:
I know that this is not the type of answer that you wish to here, but
TrailBlazer systems has a product called ZMOD400 that will allow you to do
the async connections directly from the 400 rather than use the PC as an
interface.  They have great products and tech support.  You can find them 
at
www.softwarejungle.com.  Good luck.
Carl
Carl Galgano
EDI Consulting Services, Inc.
540 Powder Springs Street
Suite C19
Marietta, GA  30064
770-422-2995
mailto: cgalgano@ediconsulting.com
http://www.ediconsulting.com
EDI, Communications and AS400 Technical Consulting

-----Original Message-----
From: Austeel - Wawrzaszek <wawrzaszek@austeel.com>
To: midrange-L@midrange.com <midrange-L@midrange.com>
Date: Friday, April 23, 1999 11:00 AM
Subject: Hyperterminal


>HELP!   I am trying to use hyperterminal to send a file to our bank.  The
>user's PC where this is used from worked for about a week, then he started
>haveing trouble.  Once it connected it couldn't grab the file-  the file#
>box in the upper right corner keeps increasing 1,2,3.....100 until the 
user
>finally cancels.  The bank says everything is fine on their end and it is
>probably some trouble with their modem.  This sort of made sense since I
>could run the same program from my PC and get the file no problem.  (The
>program resides on our IFS so we are both using the exact same program.)
>However yesterday I could not get the file it did the same thing to me 
just
>looping.  Today I can't even get a connection to the bank, yet another
>person can!!!!  Does anyone know of anything that can set your modem out 
of
>wack so that hyperterminal doesn't work or had there senarios happen to
>them.  I'm clueless on what is causing the problem.
>
>One thing I was getting sometimes when I tried to start the program my PC
>would lock up.  If I did Ctrl-Alt-Del it showed me that Winoldap was not
>responding.  I do not know what this is.  This is not however happening on
>the other PC that is having trouble.
>
>Any help is greatly appreciated!!!!!
>Thanks,
>Angie.
>
>
>+---
>| This is the Midrange System Mailing List!
>| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
>| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
>| To unsubscribe from this list send email to
MIDRANGE-L-UNSUB@midrange.com.
>| Questions should be directed to the list owner/operator:
david@midrange.com
>+---

+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to 
MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: 
david@midrange.com
+---
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---