Re: What Version of Service Pack for OS/400, etc ???

Done (and thanks EVERYONE !!).

Chuck

Rob Berendt wrote:

> Look at informational APAR II09523 available at:
> 
>http://as400service.rochester.ibm.com/as4sde/nas4apar.NSF/c79815e083182fec862564c00079d117/8a8e7e14139f422b862563c8002fd30d?OpenDocument
> 41904 and 47544 are both for 312 of Client Access.  It appears that your PC 
>is at a higher service pack than your 400 and wants to know if you want to 
>downgrade your PC.  I don't recommend it.  Instead order PTF SF47544 for your 
>400.  I recommend doing that at the site:
> http://as400service.ibm.com/as400/service.html
> after you are registered.
>
> CLEWIS@IQUEST.NET on 07/20/98 01:39:04 PM
> Please respond to MIDRANGE-L@midrange.com@Internet
> To:     MIDRANGE-L@midrange.com@Internet
> cc:
> Subject:        What Version of Service Pack for OS/400, etc ???
>
> Hi Folks,
>
> Me again...
>
> In case I haven't explained, I have taken a new job and the shop I am in
> had a 620 installed in November '97 in anticipation of getting off of a
> Unix/NCR box. That is still the plan but not much has happened with the
> AS/400 and there has been no AS/400 "knowledge" in-house. That's where I
> come in and I am TRYING to get everything "caught up"... (i.e. OS PTF's,
> CA installed, TCP/IP, backups, etc.)
>
> I figured out that I needed CA Windows 95/NT Service Pack V3R1M2 bacause
> that is what we CURRENTLY have on the ONE PC we are setting up with CA
> (that was AFTER downloading V3R1M3 and trying to apply it and getting
> the "SP must match host level" message... I'll be calling our marketing
> rep on getting V3R1M3 - as soon as I figure out who that is <BG>)...
>
> I loaded V3R1M2 on the PC and when I took the "reboot PC" option and it
> came back, I had the following message:
>
> Check Version
>
> Your managing system XXXXXX (our system name), is at Client Access
> level: SF41904.
> Your computer is at Client Access service pack level: SF47544.
>
> You can change the service pack level to match your managing system by
> uninstalling the current service pack. Do you want to uninstall the
> current service pack ?
>
> I tried calling Support Line only to find out that we have NO contract
> (something else that I am workig on... <G>) and the subscription folks
> are supposed to be calling me back.
>
> I've looked at APAR II10303 which goes over PTF's for V3Rx systems. The
> V4R1 section doesn't include much and doesn't appear to be something
> that would cause this...
>
> ANY idea what is going on ?
>
> Thanks !
>
> Chuck
>
> +---
> | This is the Midrange System Mailing List!
> | To submit a new message, send your mail to MIDRANGE-L@midrange.com.
> | To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
> | To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
> | Questions should be directed to the list owner/operator: david@midrange.com
> +---
>
> +---
> | This is the Midrange System Mailing List!
> | To submit a new message, send your mail to MIDRANGE-L@midrange.com.
> | To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
> | To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
> | Questions should be directed to the list owner/operator: david@midrange.com
> +---



+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---