Dial In Commo & Support

[Glenn Ericson <Glenn-Ericson@xxxxxxx>]

I want to set up a  dial in  to the 400 from a remote  site/office or  home. 
 Thus a PC[desktop or Laptop] would be used in all cases.

The  questions are:

1.What  software  will  work on the PC side ?
  The 400 is at V4R2M0 with TCP/IP  running to a P390 and  loop of PCs 
  and an HP III  printer as the only printer]

The purpose would be for remote support/development and if possible
to also  get to the 390  side on the same connection.
Hummingbird  provides the PC  stack  support locally.

2. What  modems  might  work  on the AS400 for  this  & to  which  port?
  There is the ECS  modem at 33.6kbs  [ a 7852?]

3.What  needs to be considered IF more than  one user
     wants to do this remotely


Glenn
___________________________________________________
Glenn Ericson,          Phoenix Consulting                      
P O Box 701164   East Elmhurst NY 11370-3164 USA                            
Phone 718 898 9805       Fax 718 446 1150
AS/400 & Year 2000- - Solutions Specialists
 © 1998 copyright,  all rights reserved
____________________________________________________


 
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---