Re: Dial In Commo & Support

Glen:
You can set up SLIP or PPP support over a v24 port, see CFGTCPPTP command.
However you will need one comm line per dialup user.  If you have an
ethernet card inthe AS400, you can get a RAS server (I like the Quick Stream
Pro, supports up to 3 dial in lines per unit and ypu can use as many units
as required).  On the PC side, just a TN5250 client and a TCP/IP stack.  If
you are running Win95/98, the IP stack is built into the OS, just config
dial up networking to do the dialing, then start up the TN client, point it
to the IP address of the 400 and away you go.  I like to use US Robotic
modems on both sides of the connection, they are cheep and work well,
although any Async moden should work.  Let me know if you need more detail.
Regards,

Carl Galgano
EDI Consulting Services, Inc.
http://www.cgalgano.home.mindspring.com
mailto://cgalgano@ediconsulting.com
(770) 422-2995

-----Original Message-----
From: Glenn Ericson <Glenn-Ericson@att.net>
To: MIDRANGE-L@midrange.com <MIDRANGE-L@midrange.com>
Date: Friday, June 26, 1998 2:33 PM
Subject: Dial In Commo & Support


>I want to set up a  dial in  to the 400 from a remote  site/office or
home.
> Thus a PC[desktop or Laptop] would be used in all cases.
>
>The  questions are:
>
>1.What  software  will  work on the PC side ?
>  The 400 is at V4R2M0 with TCP/IP  running to a P390 and  loop of PCs
>  and an HP III  printer as the only printer]
>
>The purpose would be for remote support/development and if possible
>to also  get to the 390  side on the same connection.
>Hummingbird  provides the PC  stack  support locally.
>
>2. What  modems  might  work  on the AS400 for  this  & to  which  port?
>  There is the ECS  modem at 33.6kbs  [ a 7852?]
>
>3.What  needs to be considered IF more than  one user
>     wants to do this remotely
>
>
>Glenn
>___________________________________________________
>Glenn Ericson,    Phoenix Consulting
>P O Box 701164 East Elmhurst NY 11370-3164 USA
>Phone 718 898 9805 Fax 718 446 1150
>AS/400 & Year 2000- - Solutions Specialists
> © 1998 copyright,  all rights reserved
>____________________________________________________
>
>
>
>+---
>| This is the Midrange System Mailing List!
>| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
>| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
>| To unsubscribe from this list send email to
MIDRANGE-L-UNSUB@midrange.com.
>| Questions should be directed to the list owner/operator:
david@midrange.com
>+---

+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---