Re: Replacing ECS-modems

[Danny McQuestion <dcmcques@xxxxxxxxxx>]

I tried with a USR Dual Standard Courier but did not have luck.  I had a
Motorola v.3400 sitting around so I used it.  Did not spend alot of time
with it.  Just restored options set #9 and saved it as the power on
default.

Danny Mc?
Svensson, Joakim wrote:

> Has anybody tried replacing the standard IBM ECS-modems with US
> Robotics, Multitech or some other standard modem?
> If so, any special DIP-switch settings or special AT-commands stored
> to
> the modem?
>
> (I did it myself, but it was 6-7 years ago. New technology flourish  -
>
> as opposed to my memory...)
>
> Regards
> Joakim
>
> ~~~~~~~~~~~~~~~~
> Joakim Svensson
> IT-Architect
> Cap Gemini, Sweden
> ~~~~~~~~~~~~~~~~
>
> * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
> * *
> * This is the Midrange System Mailing List!  To submit a new
> message,   *
> * send your mail to "MIDRANGE-L@midrange.com".  To unsubscribe
> from     *
> * this list send email to MAJORDOMO@midrange.com and
> specify            *
> * 'unsubscribe MIDRANGE-L' in the body of your message.
> Questions      *
> * should be directed to the list owner / operator:
> david@midrange.com   *
> * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
> * *
> uucp



--

---
Danny Mc?
E-mail:    dcmcques@vantek.net
 or Click: mailto:dcmcques@vantek.net
Web Page:  http://www.vantek.net/pages/dcmcques/index.html

-----BEGIN PGP PUBLIC KEY BLOCK-----
Version: 2.6.2
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=cnWd
-----END PGP PUBLIC KEY BLOCK-----


* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* This is the Midrange System Mailing List!  To submit a new message,   *
* send your mail to "MIDRANGE-L@midrange.com".  To unsubscribe from     *
* this list send email to MAJORDOMO@midrange.com and specify            *
* 'unsubscribe MIDRANGE-L' in the body of your message.  Questions      *
* should be directed to the list owner / operator: david@midrange.com   *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *