Re: Replacing ECS-modems

[Kirk Goins <kgoins@xxxxxxxxxxxxx>]

Svensson, Joakim wrote:
> 
> Has anybody tried replacing the standard IBM ECS-modems with US
> Robotics, Multitech or some other standard modem?
> If so, any special DIP-switch settings or special AT-commands stored to
> the modem?
> 
> (I did it myself, but it was 6-7 years ago. New technology flourish  -
> as opposed to my memory...)
> 
> Regards
> Joakim

The ECS modem when used to talk to IBM is used in SDLC mode. MOST PC
modems
don't do SDLC. The modems that do AUTOSYNC can. If you don't want to use
an IBM modem try a UDS modem. AS with anything that is largely for
business
modems that do SDLC will prob cost twice that of a modem for a PC
application 


-- 
Kirk Goins
Gresham, Oregon
EMAIL kgoins@ix.netcom.com              
      71445.1231@compuserve.com
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* This is the Midrange System Mailing List!  To submit a new message,   *
* send your mail to "MIDRANGE-L@midrange.com".  To unsubscribe from     *
* this list send email to MAJORDOMO@midrange.com and specify            *
* 'unsubscribe MIDRANGE-L' in the body of your message.  Questions      *
* should be directed to the list owner / operator: david@midrange.com   *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *