RE: News/400 Paging Program

["Leland, David" <dleland@xxxxxxxxxx>]

No, unfortunately that's not it.

Dave

>----------
>From:  Mark Welte[SMTP:MWelte@dmtn.com]
>Sent:  Thursday, July 24, 1997 1:01 PM
>To:    MIDRANGE-L@midrange.com
>Subject:       RE: News/400 Paging Program
>
>Is it possible that the old modem was programmed with the phone number
>loaded in a register somewhere? We have some modems that dial as soon
>as
>they are varied on. We have a phone number hard loaded into the modem's
>flash memory. It dials that number as soon as TR is turned on.
>
>Hope this helps,
>Mark Welte
>Denso Manufacturing Tennessee, Inc.
>
> ----------
>From: Leland, David
>To: 'MIDRANGE-L@midrange.com'
>Subject: News/400 Paging Program
>Date: Thursday, July 24, 1997 11:05AM
>
>We recently went to a RISC box and in the process went from the old
>2400
>Baud IBM modem for ECS to a new 7852-400.  The new modem works great
>for
>ECS but I cannot get it to work with our PAGER program.  Our PAGER
>program is the one from the News/400 magazine that simply varys on a
>line and controller (after setting up the phone number to be dialed on
>the controller description), and waits a few seconds and varys
>everything off.
>
>Our problem is that the new 7852-400 does not autodial when the
>controller is varied on, as the old 2400 baud modem did.  Since we
>carried over all our configuration descriptions from our old CISC box,
>I
>figured it should work as before, but it doesn't.  I did check to make
>sure that AUTODIAL was on and it is.
>
>When I do a SNDPTFORD, I can see and hear the new modem dial, however
>when I try to use our PAGER program, the modem does not dial.
>
>Anyone have any thoughts on how to get this new modem to autodial?
>
>Thanks,
>Dave
>* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
>*
>* This is the Midrange System Mailing List!  To submit a new message,  
>*
>* send your mail to "MIDRANGE-L@midrange.com".  To unsubscribe from    
>*
>* this list send email to MAJORDOMO@midrange.com and specify           
>*
>* 'unsubscribe MIDRANGE-L' in the body of your message.  Questions     
>*
>* should be directed to the list owner / operator: david@midrange.com  
>*
>* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
>*
>
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* This is the Midrange System Mailing List!  To submit a new message,   *
* send your mail to "MIDRANGE-L@midrange.com".  To unsubscribe from     *
* this list send email to MAJORDOMO@midrange.com and specify            *
* 'unsubscribe MIDRANGE-L' in the body of your message.  Questions      *
* should be directed to the list owner / operator: david@midrange.com   *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *