× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.


  • Subject: Re: ECS Line/Modem problem
  • From: Neil Palmer <NPalmer@xxxxxxxxxxx>
  • Date: Wed, 18 Jun 1997 13:09:31 -0400
  • Organization: NxTrend Technology - Canada

Whibley,Dik wrote:
> 
> From: WHIBLERM at ENGPO1 1997/06/18 08:55
> Receipt Requested:
> Subject: re: ECS Line/Modem problem
> To: LMS1.OAS at ENGLINK
> -------------------------------- Message Contents 
>------------------------------
> 
>      Neil Palmer wrote:
> 
>      >Most likely settings you don't have correct:
>      >DSR (107) On ...CONNECT
>      >RFS (106) On ...V.25 Bis
>      >(and of course, modem set to Synchronous Switched mode).   :-)
> 
>      I was told by my local IBM support that the necessary codes to set
>      modem to Synchronous are sent when making contact!!

      Huh ?

> 
>      Below are the messages I have received, + Problem display + Line
>      description. I don't understand the 'Data-set-ready already active'
>      message.

Probably because the modem has DSR set to ON or ALWAYS.
The modem may not support a DSR CONNECT option, or it isn't set.
Someone else suggested it may be that the modem you have doesn't support
V.25bis auto dial commands.  Check the modem manual for that as well.

-- 
... Neil Palmer                                      AS/400~~~~~      
... NxTrend Technology -Canada       ____________          ___  ~     
... Markham,  Ontario,  Canada       |OOOOOOOOOO| ________  o|__||=   
... Phone: (905) 731-9000 x238       |__________|_|______|_|______)   
... url:http://www.NxTrend.com        oo      oo   oo  oo   OOOo=o\   
... mailto:NPalmer@NxTrend.com     ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* This is the Midrange System Mailing List!  To submit a new message,   *
* send your mail to "MIDRANGE-L@midrange.com".  To unsubscribe from     *
* this list send email to MAJORDOMO@midrange.com and specify            *
* 'unsubscribe MIDRANGE-L' in the body of your message.  Questions      *
* should be directed to the list owner / operator: david@midrange.com   *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *


As an Amazon Associate we earn from qualifying purchases.

This thread ...

Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.