re: ECS Line/Modem problem

>     Below are the messages I have received, + Problem display + Line 
>     description. I don't understand the 'Data-set-ready already active' 
>     message.
>     The LED's on the modem are all off except MR (Modem Ready) and no 
>     LED's activate during a run.
>     ------------------------------------------------------------------
>     Vary on completed for line QESLINE.      
>     Line QESLINE varied on successfully.     
>     Vary on completed for controller QESCTL. 
>     Vary on completed for device QESPAP.                           
>     Dialing <01256840771 for controller QESCTL.                    
>     Controller QESCTL not contacted. Call out request failed. (C R)
                                       ^^^^^^^^^^^^^^^^^^^^^^^^

Are you sure that you have a good telephone line/number?  It sounds like
you're having trouble dialing out.  Try connecting a telephone to the
"phone" jack on the back of the modem and then the number above ( "
<01256840771 " ). See if you even can connect to the modem at the remote end.  

BTW, do you have to dial "9" to get an outside line at your place of work?

HTH,

jte


*************************************************
* John Earl     Gig Harbor, Washington  U.S.    *
* Email:        johnearl@blarg.net              *
*************************************************

* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* This is the Midrange System Mailing List!  To submit a new message,   *
* send your mail to "MIDRANGE-L@midrange.com".  To unsubscribe from     *
* this list send email to MAJORDOMO@midrange.com and specify            *
* 'unsubscribe MIDRANGE-L' in the body of your message.  Questions      *
* should be directed to the list owner / operator: david@midrange.com   *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *