× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



FYI:  When you try to start the MGTC server and it is already started, you 
will get an error saying that it could not be started due to reason 01. 
Reason 01 is that the server is already active.  We're going to do a 
little work on my client and see if there's an issue with this end of 
things.  Thanks again.

Patrick




"Patrick Trapp" <ptrapp@xxxxxxxxxxxx> 
Sent by: domino400-bounces+ptrapp=nex-tech.com@xxxxxxxxxxxx
01/06/2006 05:10 PM
Please respond to
Lotus Domino on the iSeries / AS400 <domino400@xxxxxxxxxxxx>


To
Lotus Domino on the iSeries / AS400 <domino400@xxxxxxxxxxxx>
cc

Subject
Re: Normal CPU?






Thanks, Tom

I did a netstat, option 3, and it shows as-mgtctrlj already running in a 
listen state.  In fact, I see a couple of the same associated with my IP 
address that are in an established state.  Possibly from my attempts to 
connect earlier?  Thanks for the tip, it gives me some more things to try.

Patrick




Tom Kreimer <tkreimer@xxxxxxxxxxx> 
Sent by: domino400-bounces+ptrapp=nex-tech.com@xxxxxxxxxxxx
01/06/2006 04:47 PM
Please respond to
Lotus Domino on the iSeries / AS400 <domino400@xxxxxxxxxxxx>


To
Lotus Domino on the iSeries / AS400 <domino400@xxxxxxxxxxxx>
cc

Subject
Re: Normal CPU?






STRTCPSVR *MGTC should start Management Central it if it is not running, 
but it has been my experience that this autostarts (not sure how to check 
that).
====================================
Tom Kreimer
Information Alternatives


Still unable to find much useful information on this.  I'm sure it's more 
due to my lack of expertise than the tools available.  To that end, is the 



Management Central piece dependent on some process running on the iSeries? 



 It fails to start when I try to start the sample monitor and I'm not 
having much luck (between support calls, of course) locating documentation 



to point me in the right direction.

Thanks,
Patrick
_______________________________________________
This is the Lotus Domino on the iSeries / AS400 (Domino400) mailing list
To post a message email: Domino400@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/domino400
or email: Domino400-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/domino400.


_______________________________________________
This is the Lotus Domino on the iSeries / AS400 (Domino400) mailing list
To post a message email: Domino400@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/domino400
or email: Domino400-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/domino400.



As an Amazon Associate we earn from qualifying purchases.

This thread ...

Follow-Ups:
Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.