× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



Could I do this by IP address, and if so would the following work:
Use BindSpecific On
Hostname xxx.xxx.xxx.xxx

Or do I need the < > like
Use BindSpecific On
Hostname <xxx.xxx.xxx.xxx>

The reason I want to use IP address goes to a stupid mistake I made, and
keep perpetuating.  I have a Domino server the same name as my 400, on this
400.

400:
Internet         Host
Address          Name
198.1.1.201      Qgdisys
                 TCPGDISYS
                 GDISYS
                 GDISYS.dekko-1

Domino server:
Internet         Host
Address          Name
10.10.1.213      GDISYS.DEKKO.COM


Rob Berendt

ÝÝÝÝÝÝÝÝÝÝÝÒThey that can give up essential liberty to obtain a little temporary
safety deserve neither liberty nor safety."
Benjamin Franklin



                    Stefan.Tageson@int
                    entia.se                 To:     domino400@midrange.com
                    Sent by:                 cc:
                    domino400-admin@mi       Fax to:
                    drange.com               Subject:     Re: AS/400 
conflicting with Domino http


                    10/30/2001 02:01
                    AM
                    Please respond to
                    domino400







> I have multiple partitioned Domino Servers on this 400.  I also have the
> AS/400 http web server starting when tcp/ip is started.  However if the
> AS/400 web server starts first then the Domino http will not work.  I am
> using a separate IP address for each of my Domino servers.  Each of my
> Domino servers have 'Bind to host name' enabled.  Is there something I
need
> to do to get the AS/400 to play nice?

Rob,
use the BindSpecific  <hostname> keyword in the HTTP configuration of the
AS/400 to prevent the HTTP-server
to bind to all local interfaces at startup.

ooooooooooooopppppppppppsss! It's too early in the morning (5.30):
Use BindSpecific On
  and
Hostname <hostname>
 to achieve the needed result.
Both keywords should be added to the HTTP-configuration using WRKHTTPCFG
Next try......

Regards

Stefan Tageson
Intentia Consulting Sverige AB
Propellergatan 1, SE-211 19 Malmö, Sweden
Phone: +46 (0)40 691 35 00
Cell: +46 (0)733 913 813
Fax: +46 (0)40 691 3900
E-mail: stefan.tageson@intentia.se

_______________________________________________
This is the Lotus Domino on the iSeries / AS400 (DOMINO400) mailing list
To post a message email: DOMINO400@midrange.com
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/cgi-bin/listinfo/domino400
or email: DOMINO400-request@midrange.com
Before posting, please take a moment to review the archives
at http://archive.midrange.com/domino400.







As an Amazon Associate we earn from qualifying purchases.

This thread ...

Follow-Ups:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.