I’ve found an apparent side effect to the error I’m getting.
I copied a CPO file and changed the source file on the host and the
local directory. I then went into
it and got this error: Server 1% not found. (I think that was it). I then checked the servers under
project set up and my server wasn’t there the way I defined it. I have the server’s ip address and have
it named something meaningful. The
ip address is what was showing up as available server. In my existing cpo definitions, they
open up ok with the server definition as the meaningful name.
Any ideas?
Phil
-----Original
Message-----
From: Phil
[mailto:sublime78ska@yahoo.com]
Sent: Thursday, June 07, 2001
12:07 PM
To: CODE400-L@midrange.com
Subject: RE: Communication Console
errors out on startup
I just started getting this error message:
“Evfcsvrd.exe has generated errors and will be closed
by Windows. You will need to
restart the program.” Restarting
generates the same error.
I can still use Code/400 but I can’t work with the
servers anymore.
Any ideas?
Phil
-----Original
Message-----
From: owner-code400-l@midrange.com
[mailto:owner-code400-l@midrange.com]On
Behalf Of Alex A Moore
Sent: Thursday, June 07, 2001
10:31 AM
To: CODE400-L@midrange.com
Subject: RE: Communication Console
errors out on startup
Of all
the things I have tried over the last several weeks, this finally improved
things. Could you please see that the install FAQ gets updated with this
info. The symptom is EVF2040 RC = 133 and once it happens, at least for
me, it happens every time the Comm daemon is accessed.
Thank
you!
Alex
-----Original Message-----
From: owner-code400-l@midrange.com
[mailto:owner-code400-l@midrange.com]On
Behalf Of hockings@ca.ibm.com
Sent: Thursday, June 07, 2001 8:12
AM
To: CODE400-L@midrange.com
Subject: Re: Communication Console
errors out on startup
The JRE install was an optional install at the
start of the install that is req'd byt the comm console (and other stuff) for
proper operation. You can re-install it by going to the ibmsdk (I think)
directory on the first CD and running the install.exe there.
Re-installing the IBM SDK for java should fix the problem.
If this does not work let me know.
Mike
Mike Hockings, P.Eng.
WebSphere Development Tools for AS/400 - CODE/Designer &
WebFacing !
IBM Canada Ltd. Laboratory
hockings@ca.ibm.com
Please respond to
CODE400-L@midrange.com
Sent by:
owner-code400-l@midrange.com
To:
CODE400-L@midrange.com
cc:
Subject: Re: Communication Console errors out on startup
Yes - all three
machines have been installed with the exact same install
disks, and the exact same functions (complete install). All three are Win
2k pro machines, 2 of them are laptops. The other two work just fine,
mine
has the problem mentioned. The install for all machines used the 3 CD
Websphere Development V4R5M1 version of the install disks, and have loaded
the latest service pack available for download from the web (60 meg, sp?1?).
At 11:09 PM 6/6/2001 -0400, you wrote:
>Jim,
>
>Do you have a Java Runtime Environment (JRE) installed? Do the other
>machines? You will get the message you mentioned if you do not have a
JRE
>installed.
>
>The Communication properites needs a JRE installed to work.
>
>Eric Simpson
>IBM Toronto Lab
>Phone: (416) 448-3226, T/L: 778-3226
>Email and SameTime Connect: esimpson@ca.ibm.com
>
>
>Jim Essinger <esinger@fmtc.com>@midrange.com on 06/06/2001 08:31:02
PM
>
>Please respond to CODE400-L@midrange.com
>
>Sent by: owner-code400-l@midrange.com
>
>
>To: CODE400-L@midrange.com
>cc:
>Subject: Communication Console errors out on startup
>
>
>Greetings!
>
>I have a strange problem, I have several machines running Win 2K Pro, and
>have loaded Code/400 (Websphere Devl Tools) V4R5M1 on 3 of them so
>far. The first two had no problems, the third (MY laptop of course)
has an
>
>error when starting up, or trying to get into the properties on the
>Communication Daemon. The error I get is (in the heading of the
window)
>"EVF2040 RC = 133". The window says "Programming
Error" and gives me an OK
>
>button. This happens every time I startup my PC due to the
Communication
>Daemon starting. I can do a STRCODE command on the 400, and it
connects to
>
>the PC, and I can end all STRCODE servers. I can't get into the
>properties. Everything else seems to be ok, but I have not done any
real
>programming.
>
>Any thoughts??
>
>Thanks!
>
>Jim Essinger
>Senior Programmer/Analyst
>Student Loan Fund of Idaho
>208-452-4058
>
>
>+---
>| This is the CODE/400 Mailing List!
>| To submit a new message, send your mail to CODE400-L@midrange.com.
>| To subscribe to this list send email to CODE400-L-SUB@midrange.com.
>| To unsubscribe from this list send email to CODE400-L-UNSUB@midrange.com.
>| Questions should be directed to the list owner/operator: larry@paque.net
>+---
>
>
>
>+---
>| This is the CODE/400 Mailing List!
>| To submit a new message, send your mail to CODE400-L@midrange.com.
>| To subscribe to this list send email to CODE400-L-SUB@midrange.com.
>| To unsubscribe from this list send email to CODE400-L-UNSUB@midrange.com.
>| Questions should be directed to the list owner/operator: larry@paque.net
>+---
+---
| This is the CODE/400 Mailing List!
| To submit a new message, send your mail to CODE400-L@midrange.com.
| To subscribe to this list send email to CODE400-L-SUB@midrange.com.
| To unsubscribe from this list send email to CODE400-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: larry@paque.net
+---
midrange.com
