RE: Communication Console errors out on startup

I am not sure if this will help you but in the beginning I played with the
comm console and deamon till I was blue in the face, sometimes things would
work, at other times they wouldnt. I then took to using Code/400 and the
debugger from teh AS/400 side

I now use the STRCODE command and have written some CL programs to start it
automatically for our programmers. Since CODE/400 will now use the sessions
LIBL and debug/compile using that sessions settings we have not had any
probelms, better yet I havent even opened the Comm Console.

We DO NOT use the VRPG so if you do use IBMS VARPG then this solution may
not work for you, Im just passing on what I have personally found helpful to
us.Good luck

> -----Original Message-----
> From: Phil [SMTP:sublime78ska@yahoo.com]
> Sent: Thursday, June 07, 2001 11:07 AM
> To:   CODE400-L@midrange.com
> Subject:      RE: Communication Console errors out on startup
> 
> I just started getting this error message:
>  
> "Evfcsvrd.exe has generated errors and will be closed by Windows.  You
> will need to restart the program."  Restarting generates the same error.
>  
> I can still use Code/400 but I can't work with the servers anymore.
>  
> Any ideas?
>  
> Phil
>  
> -----Original Message-----
> From: owner-code400-l@midrange.com [mailto:owner-code400-l@midrange.com]On
> Behalf Of Alex A Moore
> Sent: Thursday, June 07, 2001 10:31 AM
> To: CODE400-L@midrange.com
> Subject: RE: Communication Console errors out on startup
>  
> Of all the things I have tried over the last several weeks, this finally
> improved things.  Could you please see that the install FAQ gets updated
> with this info.  The symptom is EVF2040 RC = 133 and once it happens, at
> least for me, it happens every time the Comm daemon is accessed.
>  
> Thank you!
>  
> Alex  
> -----Original Message-----
> From: owner-code400-l@midrange.com [mailto:owner-code400-l@midrange.com]On
> Behalf Of hockings@ca.ibm.com
> Sent: Thursday, June 07, 2001 8:12 AM
> To: CODE400-L@midrange.com
> Subject: Re: Communication Console errors out on startup
> 
> The JRE install was an optional install at the start of the install that
> is req'd byt the comm console (and other stuff) for proper operation.  You
> can re-install it by going to the ibmsdk (I think) directory on the first
> CD and running the install.exe there.  Re-installing the IBM SDK for java
> should fix the problem. 
> 
> If this does not work let me know. 
> 
> Mike
> 
> Mike Hockings, P.Eng.
> WebSphere Development Tools for AS/400  -  CODE/Designer & WebFacing !
> IBM Canada Ltd. Laboratory 
> hockings@ca.ibm.com  
> Please respond to CODE400-L@midrange.com 
> Sent by:        owner-code400-l@midrange.com 
> To:        CODE400-L@midrange.com 
> cc:         
> Subject:        Re: Communication Console errors out on startup 
> 
> 
> Yes - all three machines have been installed with the exact same install 
> disks, and the exact same functions (complete install).  All three are Win
> 
> 2k pro machines, 2 of them are laptops.  The other two work just fine,
> mine 
> has the problem mentioned.  The install for all machines used the 3 CD 
> Websphere Development V4R5M1 version of the install disks, and have loaded
> 
> the latest service pack available for download from the web (60 meg,
> sp?1?).
> 
> At 11:09 PM 6/6/2001 -0400, you wrote:
> >Jim,
> >
> >Do you have a Java Runtime Environment (JRE) installed?  Do the other
> >machines?  You will get the message you mentioned if you do not have a
> JRE
> >installed.
> >
> >The Communication properites needs a JRE installed to work.
> >
> >Eric Simpson
> >IBM Toronto Lab
> >Phone:  (416) 448-3226,  T/L:  778-3226
> >Email and SameTime Connect:  esimpson@ca.ibm.com
> >
> >
> >Jim Essinger <esinger@fmtc.com>@midrange.com on 06/06/2001 08:31:02 PM
> >
> >Please respond to CODE400-L@midrange.com
> >
> >Sent by:  owner-code400-l@midrange.com
> >
> >
> >To:   CODE400-L@midrange.com
> >cc:
> >Subject:  Communication Console errors out on startup
> >
> >
> >Greetings!
> >
> >I have a strange problem, I have several machines running Win 2K Pro, and
> >have loaded Code/400 (Websphere Devl Tools) V4R5M1 on 3 of them so
> >far.  The first two had no problems, the third (MY laptop of course) has
> an
> >
> >error when starting up, or trying to get into the properties on the
> >Communication Daemon.  The error I get is (in the heading of the window)
> >"EVF2040 RC = 133".  The window says "Programming Error" and gives me an
> OK
> >
> >button.  This happens every time I startup my PC due to the Communication
> >Daemon starting.  I can do a STRCODE command on the 400, and it connects
> to
> >
> >the PC, and I can end all STRCODE servers.  I can't get into the
> >properties.  Everything else seems to be ok, but I have not done any real
> >programming.
> >
> >Any thoughts??
> >
> >Thanks!
> >
> >Jim Essinger
> >Senior Programmer/Analyst
> >Student Loan Fund of Idaho
> >208-452-4058
> >
> >
> >+---
> >| This is the CODE/400 Mailing List!
> >| To submit a new message, send your mail to CODE400-L@midrange.com.
> >| To subscribe to this list send email to CODE400-L-SUB@midrange.com.
> >| To unsubscribe from this list send email to
> CODE400-L-UNSUB@midrange.com.
> >| Questions should be directed to the list owner/operator:
> larry@paque.net
> >+---
> >
> >
> >
> >+---
> >| This is the CODE/400 Mailing List!
> >| To submit a new message, send your mail to CODE400-L@midrange.com.
> >| To subscribe to this list send email to CODE400-L-SUB@midrange.com.
> >| To unsubscribe from this list send email to
> CODE400-L-UNSUB@midrange.com.
> >| Questions should be directed to the list owner/operator:
> larry@paque.net
> >+---
> 
> +---
> | This is the CODE/400 Mailing List!
> | To submit a new message, send your mail to CODE400-L@midrange.com.
> | To subscribe to this list send email to CODE400-L-SUB@midrange.com.
> | To unsubscribe from this list send email to
> CODE400-L-UNSUB@midrange.com.
> | Questions should be directed to the list owner/operator: larry@paque.net
> +---
> 
> 
+---
| This is the CODE/400 Mailing List!
| To submit a new message, send your mail to CODE400-L@midrange.com.
| To subscribe to this list send email to CODE400-L-SUB@midrange.com.
| To unsubscribe from this list send email to CODE400-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: larry@paque.net
+---