× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



        I wondered about this response - my test shows that we are able
to use the mass transfer program to transfer from one facility to
another. 

        As the original questioner said, this leaves you with no
documentation and won't work for that need. DRP is a better solution,
but not the only one.

        Dick Bailey
        MCFA 

-----Original Message-----
From: bpcs-l-bounces+dick.bailey=mcfa.com@xxxxxxxxxxxx
[mailto:bpcs-l-bounces+dick.bailey=mcfa.com@xxxxxxxxxxxx] On Behalf Of
Frederick C Davy
Sent: Tuesday, June 06, 2006 9:14 AM
To: SSA's BPCS ERP System
Subject: Re: [BPCS-L] Document for Transfer finished good inter
warehouse

Indah,

If your warehouses are associated to other facilities, then you can not
use the Mass Location Transfer (INV510) to move the inventory. Mass
Location Transfer only works for warehouses associated to the same
facility (check the warehouse master INV110 to see what facility code
the warehouse is assigned to). If you need to transfer to warehouses at
a different facility you should use DRP (Distribution Resource
Planning). To accomplish this you must create a DRP Relationship for
every item/facility/to/from association that you will be using (items
must be master scheduled in MRP140 or DRP140 record). The complete setup
for DRP is too involved for this e-mail, and to do it properly you
should have your own documentation for DRP to follow. First off, you
should check the Systems Parameters for Installed Products to make sure
you have DRP installed. If you need further help, contact me at my
e-mail address below. Good luck.

Frederick C. Davy, CPIM, PMP
Business Systems Analyst
Interface Solution, Inc.
Phone: (315) 592-8101
Fax: (315) 592-8481
e-mail: fcdavy@xxxxxxxxxxxx




Indah <indah.kurniaty@xxxxxxxxx>
Sent by: bpcs-l-bounces+fcdavy=sealinfo.com@xxxxxxxxxxxx
06/06/2006 04:56 AM
Please respond to
"SSA's BPCS ERP System" <bpcs-l@xxxxxxxxxxxx>


To
bpcs-l@xxxxxxxxxxxx
cc

Subject
[BPCS-L] Document for Transfer finished good inter warehouse






Hi,

I am using BPCS v.6.1.02.
My company has several warehouse that its location is separate  from
manufacturing's location.
To transfer finished good inter warehouse, user use Mass Location 
Transfer.
Although this program has control output for transaction, but it can be 
used
by user,
because the control output doesn't have document number like Sales Order

or
Purchase Order, and detail information at there isn't enough.

Do you have any idea to solve this problem..?

thanks .

As an Amazon Associate we earn from qualifying purchases.

This thread ...

Follow-Ups:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.