What's going to drive the storage without a system? All the application
level replication (any Vision product, QEDD, iCluster, etc) will require a
system at the other end.
If you go with SAN you could have another SAN that you use PowerHA on the
SAN to replicate it but without a system to attach to it what's the point?
I think your goal might be more closely achieved but using a VTL that is
replicated to a remote facility. Then in a DR environment you'll get a
system quick shipped from IBM and continue with a bare metal restore from
the remote VTL. You're still down for at least a couple of days. Even
that sounds like a lot of money for not much bang. A CBU box does not
double your costs, except in the hardware and even that can be minimized.
I'm thinking a readjustment in the goals might be in order.
--
Jim Oberholtzer
Agile Technology Architects
-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of
(WalzCraft) Jerry Forss
Sent: Thursday, July 21, 2016 11:18 AM
To: 'Midrange Systems Technical Discussion'
Subject: RE: New Power 8 And Backup
Being I am putting together this proposal I want to throw in DR.
What are the best options of live replication?
I know MIMIX is a big player, what are your opinions?
We will not have a DR system, just want to get the live data replicated.
This may include an appliance in the IT vault (Raised floor, walls 18"
thick, fire doors, halon).
Owner may want another appliance at offsite to replicate the replication to.
Thanks!!!!
-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of
DrFranken
Sent: Thursday, July 21, 2016 9:21 AM
To: Midrange Systems Technical Discussion
Subject: Re: New Power 8
I like the Storwize option HOWEVER one must understand the difference in
type of I/O for IBM i vs Windows/Linux block file systems. As a consequence
of that difference you should not mix Windows/Linux data and IBM i Data on
the Same Drives on the SAN. They can be in the same drawer but dedicate some
drives for IBM i and other drives for Windows/Linux.
- Larry "DrFranken" Bolhuis
www.Frankeni.com
www.iDevCloud.com - Personal Development IBM i timeshare service.
www.iInTheCloud.com - Commercial IBM i Cloud Hosting.
On 7/21/2016 9:25 AM, (WalzCraft) Jerry Forss wrote:
Hi All,
Would like to solicit some opinions about configuring a new box.
We are currently on a i5 (P10) with 32gb ram and 845gb usable dasd.
I am looking at putting in Power 8 P10 with 64gb ram and 2.4tb of SSD
drives.
An option is putting in a Storwise rack for the drives so that it can also
be used for the network.
If I put in the Storwise I would either put spinning drives or SSD up to
around 9tb.
Has anyone worked with the Storwise doing what I am thinking about?
Thanks!!
Jerry Forss
Information Technology Team
WalzCraft
608-781-6355 EXT 2530
jforss@xxxxxxxxxxxxx
Subject to Change Notice:
WalzCraft reserves the right to improve designs, and to change
specifications without notice.
Confidentiality Notice:
This message and any attachments may contain confidential and
privileged information that is protected by law. The information
contained herein is transmitted for the sole use of the intended
recipient(s) and should "only" pertain to "WalzCraft" company matters.
If you are not the intended recipient or designated agent of the
recipient of such information, you are hereby notified that any use,
dissemination, copying or retention of this email or the information
contained herein is strictly prohibited and may subject you to
penalties under federal and/or state law. If you received this email
in error, please notify the sender immediately and permanently delete
this email. Thank You;
WalzCraft PO Box 1748 La Crosse, WI. 54602-1748
www.walzcraft.com<http://www.walzcraft.com/> Phone... 800-237-1326
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe, unsubscribe,
or change list options,
visit:
http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a
moment to review the archives at
http://archive.midrange.com/midrange-l.
Please contact support@xxxxxxxxxxxx for any subscription related questions.
Subject to Change Notice:
WalzCraft reserves the right to improve designs, and to change
specifications without notice.
Confidentiality Notice:
This message and any attachments may contain confidential and privileged
information that is protected by law. The information contained herein is
transmitted for the sole use of the intended recipient(s) and should "only"
pertain to "WalzCraft" company matters. If you are not the intended
recipient or designated agent of the recipient of such information, you are
hereby notified that any use, dissemination, copying or retention of this
email or the information contained herein is strictly prohibited and may
subject you to penalties under federal and/or state law. If you received
this email in error, please notify the sender immediately and permanently
delete this email. Thank You;
WalzCraft PO Box 1748 La Crosse, WI. 54602-1748
www.walzcraft.com Phone... 608-781-6355
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe, unsubscribe,
or change list options,
visit:
http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a
moment to review the archives at
http://archive.midrange.com/midrange-l.
Please contact support@xxxxxxxxxxxx for any subscription related questions.
As an Amazon Associate we earn from qualifying purchases.