MIDRANGE dot COM Mailing List Archive



Home » MIDRANGE-L » August 2014

Re: Identifying all references to a currently active program



fixed

I was thinking the same as Mark...

QRPLOBJ only comes into play in certain circumstances...

CRTPGM/CRTSRVPGM REPLACE(*YES) are the main ones

It doesn't come into play on a RSTOBJ as I recall.

If he didn't have any jobs blow up, then the *SRVPGMs weren't being used.

Charles


On Tue, Aug 12, 2014 at 4:09 PM, Paul Nelson <nelsonp@xxxxxxxxxxxxx> wrote:

If nothing was moved to QRPLOBJ, either the objects weren't in use, or a
different restore-to library was used.

Paul Nelson
Cell 708-670-6978
Office 409-267-4027
nelsonp@xxxxxxxxxxxxx


-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of
Steinmetz, Paul
Sent: Tuesday, August 12, 2014 2:39 PM
To: 'Midrange Systems Technical Discussion'
Subject: RE: Identifying all references to a currently active program

RXS 2.71 to 3.11 upgrade complete.
All is working.
No objects were moved to the QRPLOBJ library, what does this infer?
RXS license key LICP had to be moved from old license key library KTLIC to
RXS.
Object LICP in KTLIC type *FILE moved to library RXS

Paul

-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of
Paul
Nelson
Sent: Tuesday, August 12, 2014 2:24 PM
To: 'Midrange Systems Technical Discussion'
Subject: RE: Identifying all references to a currently active program

If a program is active, and a newer version is installed, the older version
is automatically stuffed into QRPLOBJ under a different name. The user
won't
know what happened. The next time the program is called, the user will get
the new version.

Paul Nelson
Cell 708-670-6978
Office 409-267-4027
nelsonp@xxxxxxxxxxxxx


-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of
Steinmetz, Paul
Sent: Tuesday, August 12, 2014 1:15 PM
To: 'Midrange Systems Technical Discussion'
Subject: Identifying all references to a currently active program

I'm upgrading a 3rd party tool later today, RXS 2.71 to 3.11.
The upgrade is simple, RSTOBJ from a savf to the RXS library, about 70
objects.
Takes about 10 seconds.
The issue is we have no easy way of knowing what programs of ours should
be
stopped/started The main RXS object is RXSSV *SRVPGM, which is part of
BNDDIR RXSBND
1) Is there a command or tool that would show any reference or call to this
program?
2) If an RPGLE program is in memory, but not currently used, if this object
if replaced by the upgrade, the reference to this program will probably
result is failure, correct?

Thank You
_____
Paul Steinmetz
IBM i Systems Administrator

Pencor Services, Inc.
462 Delaware Ave
Palmerton Pa 18071

610-826-9117 work
610-826-9188 fax
610-349-0913 cell
610-377-6012 home

psteinmetz@xxxxxxxxxx<mailto:psteinmetz@xxxxxxxxxx>
http://www.pencor.com/

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe,
unsubscribe,
or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a
moment to review the archives at http://archive.midrange.com/midrange-l.


--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.


--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.







Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2014 by MIDRANGE dot COM and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available here. If you have questions about this, please contact