MIDRANGE dot COM Mailing List Archive



Home » MIDRANGE-L » August 2014

Identifying all references to a currently active program



fixed

I'm upgrading a 3rd party tool later today, RXS 2.71 to 3.11.
The upgrade is simple, RSTOBJ from a savf to the RXS library, about 70 objects.
Takes about 10 seconds.
The issue is we have no easy way of knowing what programs of ours should be stopped/started
The main RXS object is RXSSV *SRVPGM, which is part of BNDDIR RXSBND
1) Is there a command or tool that would show any reference or call to this program?
2) If an RPGLE program is in memory, but not currently used, if this object if replaced by the upgrade, the reference to this program will probably result is failure, correct?

Thank You
_____
Paul Steinmetz
IBM i Systems Administrator

Pencor Services, Inc.
462 Delaware Ave
Palmerton Pa 18071

610-826-9117 work
610-826-9188 fax
610-349-0913 cell
610-377-6012 home

psteinmetz@xxxxxxxxxx<mailto:psteinmetz@xxxxxxxxxx>
http://www.pencor.com/






Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2014 by MIDRANGE dot COM and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available here. If you have questions about this, please contact