MIDRANGE dot COM Mailing List Archive



Home » MIDRANGE-L » May 2014

RE: Issue when installing PTFs, set to be applied an next IPL



fixed

Jim,

I didn't do anything to correct this, but following the IPL all PTFs were applied.
I think the LPAR actually did 2 IPLS.
The other thing that was interesting, some of the PTFs were still in a SAVF status, but they did get applied.

Paul

-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of franz9000
Sent: Saturday, May 10, 2014 4:24 PM
To: Midrange Systems Technical Discussion
Subject: Re: Issue when installing PTFs, set to be applied an next IPL

I've seen it several times. Usually in the instructions there is mention of "multiple ipls" possible, or if something required to be perm applied.
Jim
----- Original Message -----
From: "Steinmetz, Paul" <PSteinmetz@xxxxxxxxxx>
To: "'Midrange Systems Technical Discussion'" <midrange-l@xxxxxxxxxxxx>
Sent: Friday, May 09, 2014 4:06 PM
Subject: Issue when installing PTFs, set to be applied an next IPL


I never saw this before.
When doing option 8. Install program temporary fix package Set all
PTFs to delayed, applied at next IPL.


Continue PTF Install
System:
PENCOR06
The previous PTF install was incomplete because of processing needed
to install a technology refresh PTF. In the previous PTF install, no
PTFs were applied and at least one PTF could not be loaded because a
technology refresh PTF was not permanently applied. The previous IPL
has permanently applied the technology refresh PTF and the PTF install
can now be continued.

Press Enter to load the remaining PTFs from the install device and
apply all loaded PTFs. When installing from a tape or optical device,
mount the first volume in the PTF volume set.

Press F12 to cancel the installation.

Thank You
_____
Paul Steinmetz
IBM i Systems Administrator

Pencor Services, Inc.
462 Delaware Ave
Palmerton Pa 18071

610-826-9117 work
610-826-9188 fax
610-349-0913 cell
610-377-6012 home

psteinmetz@xxxxxxxxxx
http://www.pencor.com/

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe,
unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take
a moment to review the archives at
http://archive.midrange.com/midrange-l.


--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a moment to review the archives at http://archive.midrange.com/midrange-l.






Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2014 by MIDRANGE dot COM and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available here. If you have questions about this, please contact